PTS AT
Vishay Beyschlag
www.vishay.com
Temperature Dependent Platinum
Thin Film Chip Resistor (RTD)
FEATURES
• Standardized characteristics according to
IEC 60751
• AEC-Q200 qualified
• Short reaction times down to t0.9 2 s (in air)
• Outstanding stability of temperature
characteristic
• Superior temperature cycling robustness
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
DESIGN SUPPORT TOOLS AVAILABLE
Temperature measurement and control in
• Automotive electronics
• Aviation electronics
3
D
3D Models
Design Tools
Models
• Industrial electronics
PTS AT SMD flat chip temperature dependent resistors are
the perfect choice for temperature control of electronics
operating under varying environmental conditions. The
highly controlled platinum thin film manufacturing process
guarantees an outstanding stability of temperature
characteristics which ensures reliable operation even under
harsh conditions. Typical applications include automotive,
aviation and industrial electronics.
TECHNICAL SPECIFICATIONS
DESCRIPTION
PTS0603M
PTS0805M
100 , 500
+3850 ppm/K
F0.3, F0.6
PTS1206M
Resistance values R0 at 0 °C
Temperature coefficient (0 °C to +100 °C), IEC60751
Tolerance classes
100
100 , 500 , 1000
Temperature range
-55 °C to +175 °C
Long term stability |R0/R0|;
R0 change after 1000 h at +155 °C
0.1 %
Insulation resistance
> 10 M
0.1 mA to 1.0 mA
0.1 mA to 0.40 mA
-
100
Measurement current Imeas. (DC) (1) 500
1000
0.1 mA to 0.50 mA
0.1 mA to 1.0 mA
0.1 mA to 0.40 mA
0.1 mA to 0.25 mA
-
-
Calm air
(v = 0.0 m/s)
Self-heating at 0 °C (2)
0.9 K/mW
0.8 K/mW
0.7 K/mW
t0.5 0.1 s
t0.9 0.2 s
t0.5 1.0 s
t0.9 2.0 s
t0.5 0.2 s
t0.9 0.3 s
t0.5 1.5 s
t0.9 3.0 s
0.5 x 10-9/h
t0.5 0.3 s
t0.9 0.4 s
t0.5 2.0 s
t0.9 5.0 s
Flowing water
(v = 0.4 m/s)
Thermal response time (2)
Failure rate: FITobserved
Flowing air
(v = 3.0 m/s)
Notes
(1)
Indicated measurement currents can be applied continuously with self-heating effect of less then 0.1 °C
Valid for sensor element only, in low dissipative mode. Response time and self-heating are influenced by mounting materials as substrate,
solder lands, tracks and solders used
(2)
Revision: 25-Jun-2019
Document Number: 28899
1
For technical questions, contact: nlr@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000