PTH05050W
www.ti.com
SLTS213D–MAY 2003–REVISED JUNE 2007
6-A, 5-V INPUT NON-ISOLATED WIDE OUTPUT ADJUST POWER MODULE
FEATURES
•
•
•
•
•
•
•
•
•
•
•
Up to 6-A Output Current
5-V Input Voltage
Wide-Output Voltage Adjust (0.8 V to 3.6 V)
Efficiencies up to 95%
135 W/in3 Power Density
On/Off Inhibit
Pre-Bias Startup
Under-Voltage Lockout
Operating Temperature –40°C to 85°C
Auto-Track™ Sequencing
Output Overcurrent Protection
(Non-Latching, Auto-Reset)
•
•
IPC Lead Free 2
Safety Agency Approvals:
UL/IEC/CSA-22.2 60950-1
•
Point-of-Load Alliance (POLA) Compatible
Nominal size = 0.87in × 0.5in (22.1mm × 12.57mm)
DESCRIPTION
The PTH05050W is one of the smallest non-isolated power modules from Texas Instruments that features
Auto-Track™ sequencing. Auto-Track simplifies supply voltage sequencing in power systems by enabling
modules to track each other, or any other external voltage, during power up and power down.
Although small in size (0.87 in × 0.5 in), these modules are rated for up to 6 A of output current, and are an ideal
choice in applications where space, performance, and a power-up sequencing capability are important attributes.
The product provides high-performance step-down conversion from a 5-V input bus voltage. The output voltage
of the PTH05050W can be set to any voltage over the range, 0.8 V to 3.6 V, using single resistor.
Other operating features include an on/off inhibit, output voltage adjust (trim), and output over-current protection.
For high efficiency these parts employ a synchronous rectifier output stage, but a pre-bias hold-off capability
ensures that the output will not sink current during startup.
Target applications include telecom, industrial, and general purpose circuits, including low-power dual-voltage
systems that use a DSP, microprocessor, ASIC, or FPGA.
Package options include both throughhole and surface mount configurations.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Auto-Track, TMS320 are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Copyright © 2003–2007, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.