Term.W is
RoHS
compliant
RESISTORSꢀCAPACITORSꢀCOILSꢀDELAY LINES
PLATINUM, NICKEL, NICKEL IRON RTD’s
TEMPERATURE RATING UP TO 500°C
RoHS
d
PTC SERIES- Ceramic Case
PTS SERIES- Stainless Steel
↓
↑
B ↑↓
←
A
→
RCD’s Resistance Temperature Detectors are designed for tough
industrial applications, and are utilized to sense or regulate air (PTC) or
liquid (PTS) environments. Series PTC feature an all-welded wirewound
construction for increased durability under stress and vibration, and
exceptional stability. PTS probes are encased in a stainless steel sheath
and are available with WW or film elements.
ꢀ Inherent wirewound stability
ꢀ Resistance range: 1Ω to 1000Ω
ꢀ Tolerance available to ±0.1%
ꢀ Wide selection of TC’s (+3850 to +6720ppm)
ꢀ Excellent linearity and thermal response time
RCD
Type
Resistance
Wire
TCR
0° to 100°C
TC 3-digit Resistance
A
B
C*
Typ. [.05]
code
Range (Ω) ±.060 [1.5] ±.01 [.25]
PTC100PT
PTC100CPN
PTC100N
PTC100NF
PTC150PT
PTC150CPN
PTC150N
Platinum
Chem. Pure Nickel
Nickel 270
Nickel Iron
Platinum
Chem. Pure Nickel
Nickel 270
Nickel Iron
Platinum
Chem. Pure Nickel
Nickel 270
3850ppm
6720ppm
6000ppm
5150ppm
3850ppm
6720ppm
6000ppm
5150ppm
3850ppm
6720ppm
6000ppm
5150ppm
392
672
603
522
392
672
603
522
392
672
603
522
1 - 200
1 - 120
.016 [.4]
Lead Length 0.5 [12.7] min.
.575 [14.6]
.575 [14.6]
.675 [17.1]
.096 [2.44]
.125 [3.18]
.170 [4.32]
1 - 120
1 - 500
1 - 400
1 - 200
1 - 200
1- 1000
1- 400
1 - 200
1 - 200
1 - 1000
.016 [.4]
Lead Length 0.5 [12.7] min.
PTC50NF
PTC200PT
PTC200CPN
PTC200N
.020 [.5]
Lead Length 1.0 [25.4] min
PTC200NF
Nickel Iron
* Lead material is nickel for minimal oxidation at high temperature on platinum elements, tinned copperweld is standard on others.
LINEARITY
WIRE COMPARISON
4.0
Wire Alloy
Cost
Temp. Range
-55 to +500°C
-55 to +300°C
-55 to +300°C
-55 to +260°C
Linearity
Excellent
Fair
Fair
Fair
R/T Curve Repeatability
Platinum
Medium
High
Low
Excellent
Good
Fair
CP NICKEL
NICKEL 270
CP Nickel
Nickel 270
Nickel Iron
3.5
3.0
2.5
2.0
1.5
1.0
0
Low
Good
THERMAL RESPONSE (TIME CONSTANT) varies with different element sizes, resistance values, and wire alloy.
Typical time constant for PTC 150 PT 100 ohm is 2.2 seconds in water moving 3ft./sec. Consult factory for details.
SELF-HEATING is contingent upon resistance value, alloy, and element size. Typical self-heating for PTC 150 PT
100 ohm is 65 mW/°C in water moving at 3ft./sec. Consult factory for particular specifications.
NICKEL IRON
INTERCHANGEABILITY - The strain-free design of RCD sensors insures maximum repeatability. This characteristic
is degraded by lot-to-lot inconsistencies of the various wire alloys. Platinum being extremely consistant allows the
best interchangeability characteristics. Consult factory for specific data based on particular alloy and tolerance.
COPPER
PLATINUM
SHOCK AND VIBRATION - PTC elements withstand 100 G’s sinewave shock for 3 cycles at 10 milliseconds, and
withstand vibration 10Hz to 2200Hz at 20 G’s.
P/N DESIGNATION:
RCD Type
PTC150PT
-
1000 -
F
B
392 W
Resis. Code: 3 signif. digits & multiplier (1R00=1Ω, 10R0=10Ω, 1000=100Ω, etc.)
Tolerance Code: F=1%, D=0.5%, C=0.25%, B=0.1%
Packaging: B = Bulk
0
100 200 300 400 500 600
32 212 392 572 752 932 1112
°C
TEMPERATURE
°F
Temp. Coefficient: 3 digit code rounded to nearest 100 (392=3850ppm, 603=6000ppm, etc.)
Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable)
RTD PROBES, TEMPERATURE RATING UP TO 500°C
Series PTC (wirewound) and PT (thin-film) RTD elements can be assembled
into stainless steel sheaths for severe environmental requirements. These
probes (PTS Series) are moistureproof and pressure tight and in many
instances may be directly inserted into process lines or thermowells for
precise temperature readings. Series PTS is available in any standard PTC
resistance value and temperature coefficient, in .125” [3.18], .187 [4.75],
.250 [6.35] diameters. Teflon insulated leads are standard (other insulations
available). 2-terminal, 3-terminal, or 4-terminal configurations available.
Probe lengths available from 0.5” [12.7] to 18” [457]. Consult factory for
list of standard probe styles including surface measurement,
flange mount, screw mount, etc.
PTS SERIES
OPTIONAꢁL
-
-
-
-
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603 669 0054 Fax: 603 669 5455 Email:sales@rcdcomponents.com
FA097 Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
86
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
