PSPSP1000 Series
1000 Watt Single Output
Built-In Active PFC Function
AC/DC Switching Power Supply
FEATURES
● 3 Year Warranty
● 100% Full Load Burn-In Tested
● Universal AC Input / Full Range
● Built-In Remote Sense Function
● Built-In Remote ON/OFF Control
● Built-In Active PFC Function, PF > 0.95
● Current Sharing up to 2 units or 2000W
● AC Input Active Surge Current Limiting
● Built-In Constant Current Limiting Circuit
● Built-In Active Current Sharing and Parallel Function
● Short Circuit, Overload, Over Voltage, and Over Temperature Protected
SPECIFICATIONS: PSPSP1000 Series
All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage Range (See Note 6)
Input Frequency
90 ~ 264VAC (127 ~ 370VDC)
47 to 63Hz
AC Current (typical)
Inrush Current (typical)
Leakage Current
11.2A @ 115VAC
5.6A @ 230VAC
32A @ 115VAC 63A @ 230VAC
< 2mA @ 240VAC
Power Factor (typical)
Remote ON/OFF Control
OUTPUT SPECIFICATIONS
Output Voltage
0.96 @ 230VAC
0.96 @ 115VAC and full load
RC+/RC-: 0 ~ 0.8V = power on; 4 ~ 10V = power off sink current < 20mA
See Table
See Table
Output Power
Voltage Tolerance (See Note 3)
Voltage Adjustment Range
Line Regulation
5V output: 6%,
See Table
12V output: 3%,
13.5V & 15V outputs: 2%,
24V - 48V outputs: 1%
5V output: 0.5%,
5V output: 2.0%,
See Table
12V - 15V outputs: 0.3%,
12V - 48V outputs: 0.5%,
24V - 48V outputs: 0.2%
Load Regulation
Output Current
Ripple & Noise (max) (See Note 2)
Setup, Rise Time
5V output: 100mVp-p; 12V - 27V outputs: 150mVp-p; 48V output: 200mVp-p
1500ms, 50ms @ 230VAC 1500ms, 50ms @ 115VAC and full load
24ms @ 230VAC 24ms @ 115VAC and full load
±0.03%/°C (0 ~ 50°C)
Hold Up Time (typical)
Temperature Coefficient
PROTECTION
115 ~ 140% rated output power
Overload Protection
Protection Type: Constant current limiting; recovers automatically after fault condition is removed
See Table
Over Voltage Protection
Protection Type: Shutdown output voltage; re-power on to recover
95°C (TSW1) detect on the heatsink of PFC MOSFET
90°C (TSW2) detect the winding of output choke
Over Temperature Protection
Protection Type: Shutdown output voltage; recovers automatically after temperature goes down
GENERAL SPECIFICATIONS
Efficiency (typical)
Withstand Voltage
Isolation Resistance
ENVIRONMENTAL SPECIFICATIONS
Working Temperature
Storage Temperature
Working Humidity
Storage Humidity
Vibration
See Table
3000VAC (Input to Output), 1500VAC (Input to FG), 500VAC (Output to FG)
100MΩ/500DC (Input to Output, Input to FG, and Output to FG)
-10°C to +60°C (refer to output load derating curve)
-20°C to +85°C
20 ~ 90% RH non-condensing
10 ~ 95% RH
10 ~ 500Hz, 2G 10min./1 cycle, 60min each along X, Y, Z axes.
59,600 hours min. @ 25°C (MIL-HDBK-217F)
MTBF
PHYSICAL SPECIFICATIONS
Weight
4700 grams
278(L) x 129(W) x 127(H) mm
3 years
Dimensions
Warranty
SAFETY & EMC
Safety Standards
EMI Conduction & Radiation
Harmonic Current
EMS Immunity
UL60950-1, TUV EN60950-1 approved
Compliance to EN55022 (CISPR22) Class B
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, light industry level, criteria A
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797