PSPS65 Series
Single Output
Up to 65 Watts
FEATURES
• 2 Year Warranty
• 100% Full Load Burn-In Test
• Universal AC Input/ Full Range
• Low Leakage Current < 0.75mA
• Cooling by Free Air Convection
• Fixed Switching Frequency at 65KHz
• Short Circuit, Overload, and Over Voltage Protected
SPECIFICATIONS: PSPS65 Series
All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage
90 – 264VAC (127 – 370VDC)
47 ~ 440Hz
Input Frequency
AC Current (typical)
Inrush Current (typical)
Leakage Current
OUTPUT SPECIFICATIONS
Output Voltage
1.2A @ 115VAC
20A @ 115VAC
0.72A @ 230VAC
40A @ 230VAC cold start
< 0.75mA @ 240VAC
See Table
3.3, 5, 7.5V outputs: ±3.0%;
Output Voltage Tolerance (See Note 3)
12, 13.5, 15, 24, 27, 48V outputs: ±2.0%
Voltage Adjustment Range
Output Power (max)
Line Regulation
See Table
Rated output power for convection; 72W (+3.3V: 50W; +5V: 69W) with 18CFM min. forced air.
±1.0%
3.3, 5, 7.5V outputs: ±3.0%;
12, 13.5, 15, 24, 27, 48V outputs: ±2.0%
See Table
Load Regulation
Output Current
Ripple & Noise (max) (See Note 2)
Setup, Rise Time
See Table
800ms, 20ms at full load
60ms at full load
Hold Up Time
Temperature Coefficient
PROTECTION
±0.04%/°C (0~50°C)
See Table
Over Voltage Protection
Protection Type: Hiccup mode, recovers automatically after fault condition is removed.
73 ~ 105W (3.3V: 51 ~ 75W) (5V: 70 ~ 105W) rated output power
Protection Type: Hiccup mode, recovers automatically after fault condition is removed.
Overload Protection
GENERAL SPECIFICATIONS
Switching Frequency (fixed)
Efficiency (typical)
65KHz
See Table
Withstand Voltage
3KVAC (input to output), 1.5KVAC (input to FG), 0.5KVAC (output to FG).
100MΩ / 500VDC (input to output, input to FG, output to FG)
Isolation Resistance
ENVIRONMENTAL SPECIFICATIONS
Working Temperature
Storage Temperature
Working Humidity (non-condensing)
Storage Humidity (non-condensing)
Vibration
-10°C to +60°C (refer to output load derating curve)
-20°C to +85°C
20% ~ 90% RH non-condensing
10% ~ 95% RH
10~500Hz, 2G 10min./1cycle, Period for 60 minutes each along X, Y, and Z axes.
Free air convection
Cooling
MTBF
300,700 hours min.
MIL-HDBK-217 (25°C)
PHYSICAL SPECIFICATIONS
Weight
18 oz.
Dimensions
Warranty
127(L) x 76(W) x 42(H) mm
2 years
SAFETY & EMC (See Note 4)
Safety Standards
UL60950-1, TUV EN60950-1 Approved
EMI Conduction and Radiation
Harmonic Current
Compliance to EN55022 (CISPR22) Class B
Compliance to EN61000-3-2,3
EMS Immunity
Compliance to EN61000-4-2,3,4,5, 6, 8, 11; EN50204, EN55024, Light industry level, criteria A.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797