PSPRL0602N SERIES
220~400 Watts, AC/DC Switching Power Supplies
Rev A
Wall Industries, Inc.
U-Chassis
U-Chassis with Vented Top Cover
Enclosed with End-Side Built-in Fan
Enclosed with Top-Side Built-in Fan
Size: 6.00 x 4.00 x 1.50 inches
Size: 6.00 x 4.00 x 1.57 inches
Size: 7.01 x 4.00 x 1.60 inches
Size: 6.00 x 4.00 x 2.15 inches
FEATURES
RoHS Compliant
Built-in Remote On/Off, Power Good, and Fan Fail Alarm Functions
Peak Power 700W within 500μs Duty Duration
High Quality & Reliable Component Usage
Variable Fan Speed & Low Acoustical Noise
90~264VAC Full Range Input
220 Watts with Convection Cooling and 400 Watts with Forced Airflow
Short Circuit, Over Power, Over Voltage, and Over Temperature Protection
MTBF: 100,000 Hours (MIL-HDBK-217F)
1U Height Power Density: 11.11 Watts /cu in
Single Outputs Ranging from 12VDC to 60VDC
Active Power Factor Corrected to EN61000-3-2 Class D
UL1950, CSA C22.2 No. 950-95, EN60950, and CB Safety Approvals
Four Mechanical Options Available
DESCRIPTION
The PSPRL0602N series of AC/DC switching power supplies offers 220 Watts of output power with convection cooling and 400 Watts with forced
airflow. This series consists of single output models ranging from 12VDC to 60VDC. These models have a 90~264VAC input voltage range, active PFC
corrected to EN61000-3-2 Class D, and built-in remote on/off, power good, and fan fail alarm functions. These supplies are also protected against
short circuit, over voltage, over power, and over temperature conditions. Models are available in U-chassis (Type U), U-chassis with vented top cover
(Type C), enclosed with end-side built-in fan (Type E), and enclosed with top-side built-in fan (Type F) designs. This series is RoHS compliant and has
UL1950, CSA C22.2 No. 950-95, EN60950, and CB safety approvals.
MODEL SELECTION TABLE
Output Voltage (2)
Range
Output Current (3)
Output Power (3)
Convection Forced Air
Model Number (1)
Input Voltage
90 - 264 VAC
Regulation (6)
Ripple & Noise (5) (6)
Preset
Convection Forced Air
PSPRL0602Nx-12
PSPRL0602Nx-15
PSPRL0602Nx-18
PSPRL0602Nx-24
PSPRL0602Nx-28
PSPRL0602Nx-36
PSPRL0602Nx-48
PSPRL0602Nx-54
10 ~ 13.8 VDC
12 VDC
15 VDC
18 VDC
24 VDC
28 VDC
36 VDC
48 VDC
54 VDC
18.33A
14.67A
12.22A
9.17A
7.86A
6.11A
4.58A
4.07A
33.33A
26.67A
22.22A
16.67A
14.29A
11.11A
8.33A
1ꢀ
1ꢀ
1ꢀ
1ꢀ
1ꢀ
1ꢀ
1ꢀ
1ꢀ
220W
220W
220W
220W
220W
220W
220W
220W
400W
400W
400W
400W
400W
400W
400W
400W
1ꢀ
1ꢀ
1ꢀ
1ꢀ
1ꢀ
1ꢀ
1ꢀ
1ꢀ
14 ~ 15.5 VDC
16 ~ 20 VDC
21 ~ 26 VDC
27 ~ 34 VDC
35 ~ 42 VDC
43 ~ 50 VDC
51 ~ 60 VDC
7.41A
NOTES
1. The “x” in the model number can be “U” for U-chassis type, “C” for U-chassis with vented top cover type, “E” for enclosed with end-side built-in fan, or “F” for
enclosed with top-side built-in fan.
2. All output ranges are covered by agency certifications and the preset voltage will be set as standard models if nothing different is requested. If desired
preset output does not appear, please contact factory.
3. PSPRL0602NU-XX Models (U-chassis): 220W max. with convection cooling and 400W max. with 26.84CFM minimum forced airflow.
PSPRL0602NC-XX Models (U-chassis with vented top cover): 220W max. with convection cooling.
PSPRL0602NE-XX Models (Enclosed with end-side built-in fan): 400W max. with built-in fan airflow.
PSPRL0602NF-XX Models (Enclosed with top-side built-in fan): 400W max. with built-in fan airflow.
4. Provides peak power to 700W within 500μs for all models; for longer duty duration please contact manufacturer.
5. Ripple and noise are measured from 10kHz to 20MHz bandwidth and with a 0.1μF ceramic capacitor and a 22μF electrolytic capacitor in parallel across the output.
6. 1ꢀ minimum load is required to maintain the ripple and regulation specifications.
7. Output is fully isolated.
Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
03/14/2013
Page 1 of 8
website: www.wallindustries.com • e-mail: sales@wallindustries.com