SMT POWER INDUCTORS
Military/Aerospace Grade
Height: 7.4mm Max
Footprint: 19.8mm x 19.6mm Max
Current Rating: up to 73A
Inductance Range: .405µH to 6.2µH
Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C8
Heating 3
Current
(A)
DCR (mΩ)
Saturation Current 2
Inductance
@ Irated
(µH 15%)
Inductance
@ 0 Adc
Irated 1
Part Number 5,7
(Adc)
(µH 15%)
25°C
100°C
TYP
MAX
2-Turn (Low - Loss) series
PL10100
PL10101
0.45
0.63
0.85
1.05
1.25
1.45
73
54
39
30
25
21
.38
.38
.38
.38
.38
.38
.48
.48
.48
.48
.48
.48
0.45
0.65
0.91
1.10
1.30
1.50
95
63
46
35
29
24
80
53
37
30
26
22
73
73
73
73
73
73
PL10102
PL10103
PL10104
PL10105
2-Turn series
PL10106
PL10107
0.45
0.63
0.85
1.05
1.25
1.45
52
52
39
30
25
21
.78
.78
.78
.78
.78
.78
.98
.98
.98
.98
.98
.98
0.45
0.65
0.91
1.10
1.30
1.50
95
63
46
35
29
24
80
53
37
30
26
22
52
52
52
52
52
52
PL10108
PL10109
PL10110
PL10111
3-Turn series
PL10112
0.95
1.40
1.90
2.40
2.80
3.40
42
36
25
20
15
1.15
1.15
1.15
1.15
1.15
1.15
1.43
1.43
1.43
1.43
1.43
1.43
1.0
1.5
2.0
2.5
3.0
3.5
68
43
29
23
18
54
35
25
21
16
13
42
42
42
42
42
42
PL10113
PL10114
PL10115
PL10116
PL10117
12
15
4-Turn series
PL10118
1.60
2.40
3.30
4.00
4.90
5.80
37
30
17
14
11
1.44
1.44
1.44
1.44
1.44
1.44
1.80
1.80
1.80
1.80
1.80
1.80
1.60
2.42
3.60
4.40
5.34
6.20
55
35
20
16
13
43
27
18
15
12
10
37
37
37
37
37
37
PL10119
PL10120
PL10121
PL10122
PL10123
9
11
NOTES:
1. The rated current as listed is either 85% of the saturation current or the heating current, depending on 4. In high volt*time applications, additional heating in the component can occur due to core losses in
which value is lower.
the inductor which may neccessitate derating the current in order to limit the temperature rise of
the component. In order to determine the approximate total losses (or temperature rise) for a
given application, the total copper and core losses should be taken into account. For approximate
value of core losses, in a given application, use the core loss graph on page 24.
5. Optional Tape & Reel packaging can be ordered by adding a “T”
2. The saturation current is the current which causes the inductance to drop by 15% at the stated ambient
temperatures (25°C and 100°C). This current is determined by placing the component in the specified
ambient environment and applying a short duration pulse current (to eliminate self-heating effects)
to the component.
suffix to the part number (i.e. PL10118 becomes PL10118T). Pulse complies to industry standard tape and
reel specification EIA481.
6. Meets solderability test per IPC/EIA J-STD-002B using flux type ORL0.
7. The temperature of the component (ambient plus temperature rise) must be within the stated
opeating temperature range.
3. The heating current is the DC current which causes the temperature of the part to increase by approxi-
mately 45°C. This current is determined by mounting the component on a PCB with .25” wide, 2 oz.
equivalent copper traces, and applying the current to the device for 30 minutes with no forced air
cooling.
1
pulseelectronics.com
M194.B (1/13)