ADVANCE INFORMATION - COMPANY CONFIDENTIAL
PI3HDMI431AR
3:1 Active HDMITM Compatible Switch with Optimized
Equalization for Enhanced Signal Integrity
Description
Features
Pericom Semiconductor’s PI3HDMI431AR 3:1 active switch
circuit is targeted for high-resolution video networks that are
• Supply voltage, V = 3.3V ±5%
DD
• Each Port is compatible w/ DVI, HDMITM 1.1, HDMITM 1.2 or
based on DVI/HDMITM standards and TMDS signal processing.
The PI3HDMI431AR is an active 3 TMDS to 1 TMDS receiver
switch with Hi-Z outputs. The device receives differential signals
from selected video components and drives the video display
unit. It provides three controllable output swings that can be
controlled through a single bit. The allowable output swings are
500mV, 750mV and 1000mV. This solution also provides a unique
advanced pre-emphasis technique to increase rise and fall times
which are reduced during transmission across long distances.
HDMITM 1.3 signals
• Supports both AC-coupled and DC-coupled inputs
• Deep ColorTM Support
• High Performance, up to 2.5 Gbps per channel
• Switching support for 3 side band signals
(SCL, SDA and HPD)
• 5V Tolerance on all side band signals
• SCL, SDA, and HPD pins are the only pins that can support
HOT INSERTION
Each complete HDMITM/DVI channel also has slower speed, side
band signals, that are required to be switched. Pericom’s solution
provides a complete solution by integrating the side band switch
together with the high speed switch in a single solution. Using
Equalization at the input of each of the high speed channels,
Pericom can successfully eliminate deterministic jitter caused by
long cables from the source to the sink. The elimination of the
deterministic jitter allows the user to use much longer cables (up
to 25 meters).
• Integrated 50-ohm (±10%) termination resistors at each high
speed signal input
• Configurable output swing control
(500mV, 750mV, 1000mV)
• Configurable Pre-Emphasis levels
(0dB, 1.5dB, 3.5dB, & 6.0dB)
• Configurable De-Emphasis
(0dB, -3.5dB, -6.0dB, -9.5dB)
The maximum DVI/HDMITM Bandwidth of 2.5 Gbps provides 12-
bit deep color support, which is offered by HDMITM revision 1.3.
Due to its active uni-directional feature, this switch is designed
for usage only for the video receiver’s side. For consumer
video networks, the device sits at the receiver’s side to switch
between multiple video components, such as PC, DVD, STB,
D-VHS, etc. The PI3HDMI431AR is the industry’s first active
DVI/HDMITM switch compatible with HDMITM 1.1, 1.2, and 1.3
which ensures transmitting high-bandwidth video streams from
video components to the display unit. The PI3HDMI431AR also
provides enhanced robust ESD/EOS protection of 12kV, which is
required by many consumer video networks today.
• Optimized Equalization
Single default setting will support all cable lengths
• 12kV HBM ESD protection on all high speed data channels
• Propagation delay ≤ 2ns
• High Impedance Outputs when disabled
• Packaging (Pb-free & Green): 64-contact TQFN (ZL64)
The Optimized Equalization provides the user a single optimal
setting that can provide HDMITM compliance for all cable lengths:
1meter to 20meters and color depths of 8bit/ch, or 12bit/ch.
Pericom also offers the abiility to fine tune the equalization
settings in situations where cable length is known. For example,
if 25meter cable length is required, Pericom's solution can be
adjusted to 16dB EQ to accept 25meter cable length.
HDMI, High-Definition Multimedia Interface, and Deep Color are trademarks of
PS8894C
11/19/07
1
HDMI Licensing, LLC in the United States and other countries.
07-0255