PGA450-Q1
www.ti.com
SLDS185A –APRIL 2012–REVISED APRIL 2012
ULTRASONIC-SENSOR SIGNAL CONDITIONER
Check for Samples: PGA450-Q1
1
FEATURES
APPLICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Dual NMOS Low-Side Drivers
Configurable Burst Generator
Low-Noise Amplifier
•
•
•
Automotive Park Distance
Blind Spot Detection
Object Detection Applications
12-Bit SAR ADC
DESCRIPTION
Configurable Digital Band-Pass Filter
Digital Signal Envelope Detect
On-Chip 8-Bit Microprocessor
LIN 2.1 Physical Interface and Protocol
Watchdog Timer
The PGA450-Q1 is a fully integrated interface device
for ultrasonic transducers used in automotive park
distance or object detection applications. It
incorporates these system blocks: voltage regulators,
a 12-bit SAR ADC, an 8-bit microcontroller, a digital
band-pass filter, a DAC, dual NMOS low-side drivers,
a low-noise amplifier, an oscillator, and a LIN 2.1
physical interface and protocol for interfacing.
Four-Wire SPI for Testability / Programming
8K Bytes OTP
768 Bytes of FIFO RAM
The PGA450-Q1 possesses an 8-bit microcontroller
and OTP memory for program storage for processing
the echo signal and calculating the distance between
the transducer and the object. This data is
transmitted through the LIN 2.1 communication
protocol. The LIN 2.1 physical layer is slave-only and
does not implement the LIN wake-up feature. All
other LIN 2.1 features can be implemented in
software.
256 Bytes Scratchpad RAM
8K Bytes of Development RAM
32 Bytes of EEPROM for Application
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated