PENB1020A
Universal 19.2W
Gigabit PoE Adapter
3 Year Warranty
•10/100/1000 (MbPS) Data Rates
•Self-contained Injector
•100-240Vac Universal Input
•Green DC Power LED
•Overload and Short Circuit Protection
•Regulated Output with Low Ripple
•Compliant to UL/IEC/EN60950-1
•LPS (Limited Power Source) Compliant
•RoHS Compliant
Description
The PENB1020A Series of Power-over-Ethernet (PoE) adapters operate from a 90 to 264Vac input
range, and provide up to 19.2W of output power at an output voltage of 48Vdc. These models are
capable of operating with Gigabit Data rates, and include features include diagnostic LED, and
overvoltage, overload, and short circuit protection. This non-compliant adapter does not require a
“handshake” signal to enable the output voltage.
Specifications
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
AC Input
100-240Vac +/- 10%, 47-63 Hz single phase MTBF
>60,000 hours, calculated (7 years)
Input Current
0.5A @ 90Vac
0.25A @ 180Vac
60A peak, cold start Efficiency
Hold-Up Time
18mS min. @ 115Vac, 60Hz
60mS min. @ 230Vac, 60Hz
65% minimum
Input Inrush Current
Input Protection
Internal Primary Current Fuse provided, Turn-on Time
2.0 seconds max., at 115v230Vac, 60Hz
100mS max.@ 115/230Vac, 60Hz
10 minutes max. @ 265Vac, 60Hz
250Vac/3.15A
4242Vdc Primary – Secondary,
2,150Vdc Primary–GND, 500Vdc Secondary - GND
Dialectric Withstand
Rise Time
Earth Leakage Current
<250µA @ 264Vac, 60Hz
Short Circuit Protection
Operating Temperature
Output Power
19.2W continuous, convection cooled
0° to +40°C
-30° to +85°C
Ripple and Noise
Output Voltage
See Chart below Storage Temperature
48Vdc Typical
Relative Humidity
Altitude
5% to 95%, non-condensing
0 to 10,000 ft
Transient Response
Regulation
0.5msec for 50% load change typical
See chart below
Safety Standards
UL/IEC/EN60950-1, CE, CB
W: 1.9” x L: 4.44” x H: 1.3”. Weight: 120g
Case Material
94V-0 Black Polycarbonate Dimensions
Models
Max.
Power
15.4W
15.4W
IEEE802.3af
AC Input
Model
Output
Output
Ripple
& Noise¹
Regulation
Compliant?
Receptacle
IEC60320, C14
IEC60320, C8
Number
PENB1020A4800F01
Voltage Current
48Vdc
48Vdc
Line
Load
0.4A
0.4A
480mV pk-pk
±2%
±5%
No
PENB1020A4800N01
480mV pk-pk
±2%
±5%
No
Note: 1. Measured at 20MHz bandwidth, with noise probe as close to output RJ-45 connector as possible, and load terminated with 0.1μF
ceramic and 10μF low ESR electrolytic capacitors.
______________________________________________________________________________________________________________________________ 1 of 2
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 805.832.6131 • Email: info@slpower.com • www.slpower.com