Product Specification
PE64907
UltraCMOS® Digitally Tunable Capacitor
(DTC)
100-3000 MHz
Product Description
Features
PE64907 is a DuNE™ technology-enhanced Digitally
Tunable Capacitor (DTC) based on Peregrine’s UltraCMOS®
technology. This highly versatile product supports a wide
variety of tuning circuit topologies with emphasis on
impedance matching and aperture tuning applications.
3-wire (SPI) compatible serial interface
with built-in bias voltage generation and
ESD protection
DuNE™ technology enhanced
5-bit 32-state Digitally Tunable Capacitor
PE64907 offers high RF power handling and ruggedness
while meeting challenging harmonic and linearity
requirements enabled by Peregrine’s HaRP™ technology.
The device is controlled through the widely supported 3-wire
(SPI compatible) interface. All decoding and biasing is
integrated on-chip and no external bypassing or filtering
components are required.
Shunt configuration C = 0.85 pF to 2.4 pF
(2.82:1 tuning ratio) in discrete 50 fF
steps
High RF power handling (30 Vpk RF) and
linearity
Wide power supply range (2.3V to 4.8V)
and low current consumption
(typ. 140 μA at 2.75V)
High ESD tolerance of 2kV HBM on all
DuNE™ devices feature ease of use while delivering
superior RF performance in the form of tuning accuracy,
monotonicity, tuning ratio, power handling, size, and quality
factor. With built-in bias voltage generation and ESD
protection, DTC products provide a monolithically integrated
tuning solution for demanding RF applications.
pins
Applications include:
Tunable antennas
Tunable matching networks
Tunable filter networks
Figure 1. Functional Diagram
Figure 2. Package Type
10-lead 2 x 2 x 0.55 mm QFN
RF-
RF+
ESD
ESD
CMOS Control
Driver and ESD
Serial
Interface
DOC-02169
Document No. DOC-85325-1 │ www.psemi.com
©2017 Peregrine Semiconductor Corp. All rights reserved.
Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com
Page 1 of 10