5秒后页面跳转
PE1120MY-FREQ-OUT7 PDF预览

PE1120MY-FREQ-OUT7

更新时间: 2023-02-26 13:22:29
品牌 Logo 应用领域
PLETRONICS /
页数 文件大小 规格书
1页 38K
描述
PECL Output Clock Oscillator, 10MHz Min, 170MHz Max

PE1120MY-FREQ-OUT7 数据手册

  
Pl tronics, Inc.  
.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA  
Manufacturer of High Quality Frequency Control Products  
PE1145M PECL Series  
4 Lead Thru-Hole Metal Clock Oscillator  
10.00 MHz 170.00 MHz  
Differential PECL Output without Enable/ Disable Function  
See PE1145T for higher frequencies  
Standard Specifications  
Overall Frequency Stability  
± 50 PPM, ± 25 PPM, ± 20 PPM over Operating Temperature Range  
-
°
Operating Temperature Range 0 to +80 C is standard, but can be extended to 40 to +85°C for certain frequencies  
Supply Voltage (Vcc)  
Supply Current (Icc)  
Jitter  
3.3 volts ± 10% standard, but 5.0 volts or 2.5 volts also available  
³
60 to 70 mA typical, 90 mA maximum for 70 MHz. For < 70 MHz, consult factory  
1 pS RMS maximum, from 12 kHz to 20 MHz from carrier for ³ 70 MHz. For < 70 MHz, consult factory  
Output Load  
Output must be terminated into 50 ohms to (Vcc - 2.0 V). See Test Circuit 5 and Note 1.  
Symmetry  
Tr & Tf  
Logic “1”  
45/55% to 55/45% at 50% of Vcc level standard, tighter symmetry available  
Output Waveform  
PECL with Differential Output  
(see Waveform 2)  
³
1.0 nS max (20 to 80%) for 70 MHz. For < 70 MHz, consult factory  
Vcc - 1.025 volts minimum  
Vcc - 1.620 volts maximum  
Logic “0”  
Note 1:  
In the typical PECL 100K logic output Voh is 2.35 volts and Vol is 1.60 volts at 3.3 Vcc. The center voltage of the PECL is therefore1.975 volts.  
If a 50 ohm resistor is placed between the output and Vcc – 2 volts (1.3 volts), the current through the resistor is (1.975 – 1.3) / 50 = 13.5 mA.  
±
The same load can be simulated by a resistor of 147 1% ohms to ground (1.975 / 0.0135 = 146.29 ohms). If additional load current is placed  
on the output, its load current must be subtracted from the 13.5 mA to calculate a new load resistor. Using similar calculations, use 274 ± 1%  
ohms to ground for 5.0V operation.  
Part Numbering Guide  
Packaging  
Tube  
PE11 45 M Y -- 70.0M  
Model  
Frequency in MHz  
Special Specifications (choose all that apply)  
E: Extended Operating Temperature Range (- 40 to +85 C)  
F: 47.5 /52.5% Symmetry at 50% of Vcc  
V: Supply Voltage of 3.3 volts ± 10%  
W: Supply Voltage of 2.5 volts ± 5%  
Y: Supply Voltage of 5.0 volts ± 10%  
Frequency Stability  
°
45 = ± 50 PPM  
44 = ± 25 PPM  
20 = ± 20 PPM  
Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.  
Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load  
Mechanical: inches (mm)  
not to scale  
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.  
.200 (5.08) MAX  
.600 (15.24)  
.807 (20.5) MAX  
.031 (0.8)  
8 Q Out  
14  
1
Vcc  
PLETRONICS  
.020  
(.51)  
QN Out  
7 GND  
.250 (6.35) MAX  
May 2002  
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com  
Pl tronics, Inc.  

与PE1120MY-FREQ-OUT7相关器件

型号 品牌 获取价格 描述 数据表
PE1120TE-170.0M PLETRONICS

获取价格

Oscillator, 170MHz Min, 400MHz Max, 170MHz Nom, Hybrid
PE1120TEF-180.0M PLETRONICS

获取价格

Oscillator
PE1120TEFV-170.0M PLETRONICS

获取价格

Oscillator, 170MHz Min, 650MHz Max, 170MHz Nom
PE1120TEFY-120.0M PLETRONICS

获取价格

Oscillator
PE1120TEV PLETRONICS

获取价格

PE11T Series 3.3 V PECL Clock Oscillators
PE1120TEV-110.0M PLETRONICS

获取价格

Oscillator
PE1120TEV-180.0M-T500 PLETRONICS

获取价格

Oscillator
PE1120TEY-120.0M PLETRONICS

获取价格

Oscillator
PE1120TEY-650.0M PLETRONICS

获取价格

Oscillator, 170MHz Min, 650MHz Max, 650MHz Nom
PE1120TF-120.0M PLETRONICS

获取价格

Oscillator