PCM2704C, PCM2705C
PCM2706C, PCM2707C
Burr-Brown Audio
www.ti.com
SBFS036A –AUGUST 2011–REVISED JULY 2012
Stereo Audio DAC with USB Interface,
Single-Ended Headphone Output and S/PDIF Output
Check for Samples: PCM2704C, PCM2705C, PCM2706C, PCM2707C
1
FEATURES
23456
• On-Chip USB Interface:
–
Up to Eight Human Interface Device (HID)
Interfaces (Model and Setting Dependent)
–
–
–
No Dedicated Device Driver Needed
Full-Speed Transceivers
–
–
–
–
Suspend Flag
S/PDIF Out with SCMS
Fully Compliant with USB 2.0 Specification
External ROM Interface (PCM2704C/6C)
–
USB 1.1 Descriptors with USB Audio
Class Support
Serial Programming Interface
(PCM2705C/7C)
I2S™ Interface (Selectable on
PCM2706C/7C)
–
–
–
Certified by USB-IF
–
Partially Programmable Descriptors
Adaptive Isochronous Transfer for
Playback
•
Packages:
–
–
28-Pin SSOP (PCM2704C/5C)
32-Pin TQFP (PCM2706C/7C)
–
Bus-Powered or Self-Powered Operation
•
•
Sampling Rates: 32 kHz, 44.1 kHz, 48 kHz
On-Chip Clock Generator with Single 12-MHz
Clock Source
APPLICATIONS
•
•
•
•
•
USB Headphones
•
Single Power Supply:
USB Audio Speaker
–
–
Bus-Powered: 5 V, Typical (VBUS
Self-Powered: 3.3 V, Typical
)
USB CRT/LCD Monitor
USB Audio Interface Box
USB-Featured Consumer Audio Product
•
16-Bit Delta-Sigma Stereo DAC
–
Analog Performance at 5 V (Bus-Powered),
3.3 V (Self-Powered):
DESCRIPTION
–
THD+N: 0.006% RL > 10 kΩ, Self-
The PCM2704C/5C/6C/7C are TI's single-chip USB
stereo audio digital-to-analog converters (DACs) with
USB 2.0 compliant full-speed protocol controller and
S/PDIF. The USB-protocol controller works with no
software code, but USB descriptors can be modified
in some areas (for example, vendor ID/product ID)
through the use of an external ROM (PCM2704C/6C)
or serial peripheral interface (SPI) (PCM2705C/7C).
The PCM2704C/5C/6C/7C also employ SpAct™
architecture, TI's unique system that recovers the
audio clock from USB packet data. On-chip analog
phase-locked loops (PLLs) with SpAct enable
playback with low clock jitter.
Powered
–
–
–
–
THD+N: 0.025% RL = 32 Ω
SNR = 98 dB
Dynamic Range: 98 dB
PO = 12 mW, RL = 32 Ω
–
Oversampling Digital Filter
–
–
Passband Ripple = ±0.04 dB
Stop-Band Attenuation = –50 dB
–
–
Single-Ended Voltage Output
Analog LPF Included
•
Multiple Functions:
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
4
5
6
SpAct is a trademark of Texas Instruments.
System Two, Audio Precision are trademarks of Audio Precision, Inc.
SPI is a trademark of Motorola, Inc.
I2S, I2C are trademarks of NXP Semiconductors.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011–2012, Texas Instruments Incorporated