5秒后页面跳转
PCA9534BS3 PDF预览

PCA9534BS3

更新时间: 2024-12-01 10:17:07
品牌 Logo 应用领域
恩智浦 - NXP /
页数 文件大小 规格书
25页 155K
描述
8-bit I2C-bus and SMBus low power I/O port with interrupt

PCA9534BS3 数据手册

 浏览型号PCA9534BS3的Datasheet PDF文件第2页浏览型号PCA9534BS3的Datasheet PDF文件第3页浏览型号PCA9534BS3的Datasheet PDF文件第4页浏览型号PCA9534BS3的Datasheet PDF文件第5页浏览型号PCA9534BS3的Datasheet PDF文件第6页浏览型号PCA9534BS3的Datasheet PDF文件第7页 
PCA9534  
8-bit I2C-bus and SMBus low power I/O port with interrupt  
Rev. 03 — 6 November 2006  
Product data sheet  
1. General description  
The PCA9534 is a 16-pin CMOS device that provide 8 bits of General Purpose parallel  
Input/Output (GPIO) expansion for I2C-bus/SMBus applications and was developed to  
enhance the NXP Semiconductors family of I2C-bus I/O expanders. The improvements  
include higher drive capability, 5 V I/O tolerance, lower supply current, individual I/O  
configuration, 400 kHz clock frequency, and smaller packaging. I/O expanders provide a  
simple solution when additional I/O is needed for ACPI power switches, sensors,  
push buttons, LEDs, fans, etc.  
The PCA9534 consists of an 8-bit Configuration register (Input or Output selection); 8-bit  
Input register, 8-bit Output register and an 8-bit Polarity Inversion register (active HIGH or  
active LOW operation). The system master can enable the I/Os as either inputs or outputs  
by writing to the I/O configuration bits. The data for each input or output is kept in the  
corresponding Input or Output register. The polarity of the Input Port register can be  
inverted with the Polarity Inversion register. All registers can be read by the system  
master. Although pin-to-pin and I2C-bus address compatible with the PCF8574 series,  
software changes are required due to the enhancements and are discussed in Application  
Note AN469.  
The PCA9534 is identical to the PCA9554 except for the removal of the internal I/O pull-up  
resistor which greatly reduces power consumption when the I/Os are held LOW.  
The PCA9534 open-drain interrupt output is activated when any input state differs from its  
corresponding input port register state and is used to indicate to the system master that  
an input state has changed. The power-on reset sets the registers to their default values  
and initializes the device state machine.  
Three hardware pins (A0, A1, A2) vary the fixed I2C-bus address and allow up to eight  
devices to share the same I2C-bus/SMBus.  
2. Features  
I 8-bit I2C-bus GPIO  
I Operating power supply voltage range of 2.3 V to 5.5 V  
I 5 V tolerant I/Os  
I Polarity Inversion register  
I Active LOW interrupt output  
I Low standby current  
I Noise filter on SCL/SDA inputs  
I No glitch on power-up  
I Internal power-on reset  

PCA9534BS3 替代型号

型号 品牌 替代类型 描述 数据表
PCF8574RGTRG4 TI

功能相似

REMOTE 8-BIT I/O EXPANDER FOR I2C BUS
PCA9534RGTR TI

功能相似

REMOTE 8-BIT I2C AND SMBus LOW-POWER I/O EXPANDER WITH INTERRUPT OUTPUT AND CONFIGURATION

与PCA9534BS3相关器件

型号 品牌 获取价格 描述 数据表
PCA9534BS3,118 NXP

获取价格

PCA9534 - 8-bit I2C-bus and SMBus low power I/O port with interrupt QFN 16-Pin
PCA9534BS-T NXP

获取价格

IC 8 I/O, PIA-GENERAL PURPOSE, PQCC16, 4 X 4 MM, 0.85 MM HEIGHT, PLASTIC, MO-220, SOT629-1
PCA9534D NXP

获取价格

8-bit I2C and SMBus, low power I/O port with interrupt
PCA9534D,118 NXP

获取价格

PCA9534 - 8-bit I2C-bus and SMBus low power I/O port with interrupt SOP 16-Pin
PCA9534DB TI

获取价格

REMOTE 8-BIT I2C AND SMBus LOW-POWER I/O EXPANDER WITH INTERRUPT OUTPUT AND CONFIGURATION
PCA9534DBG4 TI

获取价格

REMOTE 8-BIT I2C AND SMBus LOW-POWER I/O EXPANDER WITH INTERRUPT OUTPUT AND CONFIGURATION
PCA9534DBQR TI

获取价格

REMOTE 8-BIT I2C AND SMBus LOW-POWER I/O EXPANDER WITH INTERRUPT OUTPUT AND CONFIGURATION
PCA9534DBR TI

获取价格

REMOTE 8-BIT I2C AND SMBus LOW-POWER I/O EXPANDER WITH INTERRUPT OUTPUT AND CONFIGURATION
PCA9534DBRG4 TI

获取价格

REMOTE 8-BIT I2C AND SMBus LOW-POWER I/O EXPANDER WITH INTERRUPT OUTPUT AND CONFIGURATION
PCA9534DBT TI

获取价格

REMOTE 8-BIT I2C AND SMBus LOW-POWER I/O EXPANDER WITH INTERRUPT OUTPUT AND CONFIGURATION