PC123XxYSZ1BSeries
DIP 4pin Reinforced Insulation Type
Photocoupler
PC123XxYSZ1B
Series
Agency approvals/Compliance
1. Recognized by UL1577 (Double protection isolation),
file No. E64380 (as model No. PC123)
2. Approved by BSI, BS-EN62368
(as model No. PC123)
3. Approved by SEMKO, EN60065, EN60335-1, EN60950
(as model No. PC123)
Description
PC123XxYSZ1B Series contains an IRED optically
coupled to a phototransistor.
It is packaged in a 4-pin DIP, available in wide-lead
spacing option and SMT gullwing lead-formoption.
Input-output isolation voltage(rms) is 5kV.
CTR is 50% to 400% (at IF=5mA,VCE=5V,Ta=25℃)
4. Approved by DEMKO, EN60065, EN60335-1,EN60950,
Features
1. 4-pin DIPpackage
2. Double transfer mold package
(Ideal for Flow Soldering)
3.Current transfer ratio
(CTR : MIN. 50% at IF=5 mA, VCE=5V, Ta=25℃)
4.Several CTR ranks available
5.Reinforced insulation type
(Isolation distance : MIN. 0.4mm)
6.Long creepage distance type
(wide lead-form type only : MIN. 8mm)
7.High isolation voltage between input and output
(Viso(rms) : 5kV)
(as model No. PC123)
5. Approved by NEMKO, EN60065,EN60335-1, EN60950
(as model No. PC123)
6. Approved by FIMKO, EN60065,EN60335-1, EN60950,
(as model No. PC123)
7.Recognized by CSA file No. CA95323
(as modelNo. PC123)
*
8. Approved by VDE, DIN EN60747-5-5( ) (as an option)
File No. 40008087 (as model No. PC123)
9.Package resin : UL flammability grade (94V - 0)
() DIN EN60747-5-5 : successor standard of DIN VDE0884.
Applications
8.RoHS directivecompliant
1. I/O isolation for MCUs (Micro ControllerUnits)
2. Noise suppression in switching circuits
3. Signal transmission between circuits of different po-
tentials andimpedances
4. Over voltagedetection
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specificationsheets, SHARP takes no responsibilityfor any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specificationsheets before using any SHARPdevice.
Sheet No.: OP18001EN
Date Jan.15. 2018
© SHARPCorporation
1