PAC195X
Single/Multi-Channel Power Monitor
with Accumulator, 32V Full-Scale Range
Features
Applications
• High-Side/Low-Side Current Monitor with One,
Two, Three or Four Channels:
• Embedded Computing
• Networking
- 100 mV Full-Scale Range (FSR) for current
sense voltage
• FPGA Systems
• Low-Voltage/High-Power – AI, GPU
• Industrial
- Programmable FSR: -50 mv to +50 mv
- 16-bit resolution for current measurements
®
• Linux Applications
- External sense resistor sets the full-scale
current range
• Notebook and Tablet Computing
• Cloud, Linux and Server Computing
• Optical Networking Modules
• Automotive
- Very low input current simplifies routing
• Voltage Monitor with Wide VBUS Range
- 0V to 32V FSR
- 16V programmable VBUS option
Computing Platform Support
- 16-bit resolution for voltage measurements
• VSOURCE Can Be Applied before VDD Is Applied
• Windows® 10 Driver
• Arduino Library
• Python™ Script
• MCC Library
• Real-Time Auto-Calibration of Offset Error for
Voltage and Current
• 1% Power Measurement Accuracy over a Wide
Dynamic Range
Description
• On-Chip Accumulation of 30-bit Power Results for
Energy Measurement
The PAC195X products are one, two, three and
four-channel energy monitors, with bus voltage moni-
tors and current sense amplifiers that feed
high-resolution ADCs. There are two versions of the
PAC195X: the PAC195X-1 devices are for high-side
current sensing and the PAC195X-2 devices are for
low-side current sensing or floating VBUS applications.
- User programmable sampling rates of 8, 64,
256 and 1024 SPS
- 5120 SPS for a single channel in Burst mode
• 2.7V to 5.5V Supply Operation
- 1.62-5.5V capable I2C/SMBus and digital I/O
- SMBus 3.1 and I2C Fast Mode Plus, 1 Mbps
- High-Speed mode (3.4 Mbps)
Digital circuitry performs power calculations and
energy accumulation. This enables energy monitoring
with integration periods up to one year or longer. Bus
voltage, sense resistor voltage and accumulated pro-
portional power are stored in registers for retrieval by
the system host or embedded controller. The PAC195X
devices have a set of digital comparators that allow the
user to detect over/undervoltage, over/undercurrent
and overpower against user programmed limits for
each channel and generate an ALERT when the
threshold is exceeded.
• SMBus Address – 16 Options, Set with Resistor
• ALERT Features that Can Be Enabled:
- ALERT on conversion complete
- ALERT on Over/Undervoltage and Current or
Overpower conditions
• Coulomb Counting: When Selected, the
Accumulator Accumulates VSENSE Values.
• 8X Averaging Mode for Single-Shot
Measurements to Reduce Noise and Offset
The sampling rate and energy integration period can be
controlled over SMBus or I2C. Active channel selection,
single-shot measurements and other controls are also
configurable by the SMBus or I2C. The PAC195X
device family uses real-time calibration to minimize the
offset error. No input filters are required for this device.
• Two Independent ALERT/GPIO pins
• AEC-Q100 Qualified (VQFN)
• Available Packages:
- 3 x 3 mm 16-Lead VQFN with wettable flanks
- 2.225 x 2.17 mm 16-Lead WLCSP
2021-2022 Microchip Technology Inc. and its subsidiaries
DS20006539D-page 1