PA44QFxxx-44QF Data Sheet
44 pin QFP socket/44 pin QFP plug
Supported Device/Footprints
These adapters accept 44 pin QFP devices and have a
removable 44 pin QFP solder-down plug. This allows QFP device
to be inserted into and removed from a prototype easily.
The QFP socket accepts packages with the dimension sets listed
below:
Socket
44QF-03 10.0 mm typ 11 mm typ
PQFP
44QF-14C 10.0 mm typ 12.8 mm typ 13.9 mm typ
PQFP
Body
Knee
Tip
12 mm typ
Pitch
0.8 mm
11.3 mm max 12.8 mm max
PA44QF16-44QF
0.8 mm
0.8 mm
Adapter Construction
The adapter is made up of 4 sub-assemblies. They assemble via
connectors making the adapter modular. This way the sub-
assemblies can be replaced easily.
44QF-16 10.0 mm typ 11.6 mm typ 13.2 mm typ
PQFP
The QFP plug will fit most 44 pin. 0.8mm pitch, QFP land
patterns. Usually the pads extend from the body past the tip of
the device leads. This plug will fit on pads that have a minimum
span of 10.0mm or less and a maximum span of 12.0mm or
more.
When disassembling the adapter take care not to bend the pins.
When reassembling the adapter note the pin 1 indicators to align
the parts correctly.
Inner pad span
10.0mm or less
Outer pad span
12.0mm or more
The following chart shows the adapters described by this
datasheet and their subassemblies.
Adapter
Socket
Top
Board
Bottom
Board
QFP
Plug
The QFP Plug’s leads are dimensioned as follows.
PA44QF03-44QF
44QF-03
44QF-03-TP 44-PLUG-Q PQF-44
PA44QF14C-44QF 44QF-14C 44QF-16-TP 44-PLUG-Q PQF-44
PA44QF16-44QF
44QF-16
44QF-16-TP 44-PLUG-Q PQF-44
Test Socket
LSC #
Style
Mfgr/Pn
44QF-03
44QF-14C
44QF-16
Open Top
Lidded ZIF
Lidded ZIF
Enplas OTQ-44-0.8-03
Enplas FPQ-44-0.8-14C
Enplas FPQ-44-0.8-16
Plug
Body
Knee
Tip
Pitch
PQF-44 10.0 mm typ 9.6 mm typ 12.0 mm typ 0.8 mm
QFP Plug
Adapter Dimensions
Solders to the QFP land pattern on the prototype. Additional QFP
Plugs can be purchased separately.
Adapter Wiring
The adapter is wired 1 to 1. QFP socket pin 1 connects to QFP
plug pin 1. Pin 2 to pin 2 and so on around the package.
PA44QF03-44QF
PA44QFxxx-44QF Data Sheet
Doc: 44QXQF.DOC
Rev 04/05/04
Logical Systems Corporation
PO Box 6184, Syracuse, NY 13217-6184 USA
Tel (315) 478-0722, FAX (315) 479-6753
Page 1 of 1
www.logicalsys.com, Email: info@logicalsys.com
S Y S T E M S