�ꢀꢁꢂꢃꢄꢅꢃꢆꢂꢇꢄꢃꢅꢂꢇꢈꢉꢀꢃꢊꢈꢋꢄꢈꢌꢅꢋꢀꢍꢀꢂꢇꢎ
�ꢀꢁꢂꢃꢄꢃ�ꢀꢁꢂꢀ
�
ꢀ
ꢁ
ꢂ
ꢃ
ꢄ
ꢅ
ꢁ
ꢆ
ꢇ
ꢃ
ꢈ
ꢃ
ꢉ
ꢊ
�ꢀꢀꢁꢂꢃꢃꢄꢄꢄꢅꢆꢁꢇꢈꢉꢊꢋꢌꢍꢀꢇꢋ�ꢅꢋꢍꢉꢎꢎꢎꢏꢐꢑꢑꢒꢎꢓꢔꢕꢖꢆꢁꢇꢈꢎꢎꢎꢏꢐꢑꢑꢒꢎꢓꢔꢕꢖꢗꢘꢙꢚ
FEATURES
• POWER MOS TECHNOLOGY — 2A peak rating
• HIGH GAIN BANDWIDTH PRODUCT — 150MHz
• VERY FAST SLEW RATE — 200V/µs
• PROTECTED OUTPUT STAGE — Thermal shutoff
• EXCELLENT LINEARITY — Class A/B output
• WIDE SUPPLY RANGE — ±12V to ±40V
• LOW BIAS CURRENT, LOW NOISE — FET input
8-PIN TO-3
PACKAGE STYLE CE
APPLICATIONS
• VIDEO DISTRIBUTION AND AND AMPLIFICATION
• HIGH SPEED DEFLECTION CIRCUITS
• POWER TRANSDUCERS TO 2MHz
• COAXIAL LINE DRIVERS
• POWER LED OR LASER DIODE EXCITATION
DEFLECTION AMPLIFIER (FIGURE 1)
The deflection amplifier circuit of Figure 1 achieves arbi-
trary beam positioning for a fast heads-up display. Maximum
transition times are 4µs while delivering 2A pk currents to the
13mH coil. The key to this circuit is the sense resistor (RS)
which converts yoke current to voltage for op amp feedback.
This negative feedback forces the coil current to stay exactly
proportional to the control voltage. The network consisting of
R , RF and CF serves to shift from a current feedback via RS to
aDdirect voltage feedback at high frequencies. This removes
the extra phase shift caused by the inductor thus preventing
oscillation. See Application Note 5 for details of this and other
precision magnetic deflection circuits.
DESCRIPTION
The PA09 is a high voltage, high output current operational
amplifier optimized to drive a variety of loads from DC through
thevideofrequencyrange.Excellentinputaccuracyisachieved
with a dual monolithic FET input transistor which is cascoded
bytwohighvoltagetransistorstoprovideoutstandingcommon
mode characteristics. All internal current and voltage levels
are referenced to a zener diode biased on by a current source.
As a result, the PA09 exhibits superior DC and AC stability
over a wide supply and temperature range.
EQUIVALENT SCHEMATIC
ꢁ
�
ꢈꢆ
ꢌꢆ
ꢇꢀ
Highspeedandfreedomfromsecondbreakdownisassured
by a complementary Power MOS output stage. For optimum
linearity, especially at low levels, the Power MOS transistors
are biased in the class A/B mode. Thermal shutoff provides
full protection against overheating and limits the heatsink
requirements to dissipate the internal power losses under
normaloperatingconditions.Abuilt-incurrentlimitprotectsthe
amplifieragainstoverloading.Transientinductiveloadkickback
protectionisprovidedbytwointernalclampingdiodes.External
phase compensation allows the user maximum flexibility in
obtaining the optimum slew rate and gain bandwidth product
at all gain settings. For continuous operation under load, a
heatsink of proper rating is recommended.
ꢇꢄ
ꢇ�
ꢇꢆ
ꢇꢁ
ꢇꢅ
ꢂ
ꢃ
ꢇꢂ
ꢇꢆ�
ꢇꢆꢆ
ꢇꢆꢅ
ꢇꢃ
ꢇꢋ
ꢆ
ꢇꢆꢁꢍ
ꢇꢆꢁꢊ
ꢌꢁ
ꢇꢆꢂ
ꢄ
ꢅ
ꢇꢆꢉ
ꢇꢆꢋ
ꢈ�
ꢇꢆꢄ
ꢇꢆꢀ
Thishybridintegratedcircuitutilizesthickfilm(cermet)resis-
tors, ceramic capacitors and silicon semiconductor chips to
maximize reliability, minimize size and give top performance.
Ultrasonicallybondedaluminumwiresprovidereliableintercon-
nections at all operating temperatures. The CE, 8-pin TO-3
ꢈꢁ
ꢇꢆꢃ
ꢀ
EXTERNAL CONNECTIONS
package is hermeti-
callysealedandelec-
trically isolated. The
use of com-pressible
thermalwashersand/
orimpropermounting
torque will void the
product warranty.
Please see “General
Operating Consider-
ations”.
�ꢀꢁꢂ
ꢒꢒꢌꢌꢌꢎꢆꢇ
ꢗꢘ
ꢗꢙ
ꢚꢌꢛꢔꢜꢝꢞ
ꢕꢖꢗ
ꢒꢃꢑ
ꢉ
ꢀ
ꢈ
ꢁ
ꢓꢔꢅꢐ
ꢢ
ꢄ
ꢎ
ꢘꢌꢚꢌꢂꢘꢌꢜꢈꢋ
ꢀꢔ�
ꢂꢕ
ꢇ
ꢖ
ꢘ�
ꢘꢑ
ꢉ
ꢊ
ꢋ
ꢒꢄꢓ
ꢐꢄꢓ
ꢒꢇ
�ꢀꢁꢂꢃꢄꢅꢆ
ꢟꢠ
ꢄꢁꢅꢆꢇ
ꢉꢀꢝꢡ
ꢉꢊ
ꢎ
ꢈꢏ
ꢀꢍꢐꢑ
ꢌ
ꢏꢏ
ꢃꢀꢁꢂ
ꢍ
ꢈꢇ
ꢐꢃꢑ
ꢏꢏ
ꢘꢏ
ꢉꢅꢅꢊ
ꢈꢋꢌꢌ
ꢍꢎꢊꢌꢌ
ꢘꢑꢂꢙꢂꢚꢛꢒꢃꢑꢛꢂꢒꢂꢛꢐꢃꢑꢛꢜꢂꢘ�ꢂꢝꢇꢞꢌ
ꢓꢀ�ꢅꢟꢂꢄꢠꢡꢢꢣꢂꢤꢥꢥꢦꢧꢣꢂꢨꢤꢩꢣꢪꢫꢧꢂꢣꢬꢭꢮꢂꢤꢡꢣꢭꢤꢠꢪꢩꢞꢂꢂꢘ�ꢂꢙꢂꢇꢯꢰꢱꢂꢲꢖꢳ
ꢇꢕꢣꢤꢈꢥꢌꢉꢍꢌꢌꢓꢔꢅꢐꢌꢔꢋꢌꢏꢥꢇꢟꢥꢒꢦꢕꢧꢨꢌꢔꢩꢓꢟꢕꢇꢕꢥꢈ
APEX MICROTECHNOLOGY CORPORATION • TELEPHONE (520) 690-8600 • FAX (520) 888-3329 • ORDERS (520) 690-8601 • EMAIL prodlit@apexmicrotech.com
1