5秒后页面跳转
P6KE120ATRE3 PDF预览

P6KE120ATRE3

更新时间: 2024-11-18 19:16:23
品牌 Logo 应用领域
美高森美 - MICROSEMI 局域网二极管
页数 文件大小 规格书
4页 240K
描述
Trans Voltage Suppressor Diode, 600W, 102V V(RWM), Unidirectional, 1 Element, Silicon, ROHS COMPLIANT, PLASTIC, T-18, 2 PIN

P6KE120ATRE3 技术参数

是否Rohs认证: 符合生命周期:Obsolete
包装说明:O-PALF-W2针数:2
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8541.10.00.50风险等级:5.59
最大击穿电压:126 V最小击穿电压:114 V
击穿电压标称值:120 V外壳连接:ISOLATED
最大钳位电压:165 V配置:SINGLE
二极管元件材料:SILICON二极管类型:TRANS VOLTAGE SUPPRESSOR DIODE
JESD-30 代码:O-PALF-W2JESD-609代码:e3
湿度敏感等级:1最大非重复峰值反向功率耗散:600 W
元件数量:1端子数量:2
封装主体材料:PLASTIC/EPOXY封装形状:ROUND
封装形式:LONG FORM峰值回流温度(摄氏度):NOT SPECIFIED
极性:UNIDIRECTIONAL最大功率耗散:5 W
认证状态:Not Qualified最大重复峰值反向电压:102 V
子类别:Transient Suppressors表面贴装:NO
技术:AVALANCHE端子面层:MATTE TIN
端子形式:WIRE端子位置:AXIAL
处于峰值回流温度下的最长时间:NOT SPECIFIEDBase Number Matches:1

P6KE120ATRE3 数据手册

 浏览型号P6KE120ATRE3的Datasheet PDF文件第2页浏览型号P6KE120ATRE3的Datasheet PDF文件第3页浏览型号P6KE120ATRE3的Datasheet PDF文件第4页 
P6KE6.8 thru 200CA, e3  
600 Watt TRANSIENT VOLTAGE  
SUPPRESSOR  
S C O T T S D A L E D I V I S I O N  
DESCRIPTION  
APPEARANCE  
This P6KE series is an economical 600 W Transient Voltage Suppressor (TVS)  
for protecting voltage-sensitive components from destruction or degradation. It  
is available in both unidirectional and bi-directional configurations as well as  
RoHS Compliant (annealed matte-Tin finish) with an e3 suffix added to the part  
number. The response time of their clamping action is virtually instantaneous.  
As a result, they may also be used effectively for protection from ESD or EFT  
per IEC61000-4-2 and IEC61000-4-4 or for inductive switching environments  
and induced RF. They can also be used for protecting other sensitive  
components from secondary lightning effects per IEC61000-4-5 and class  
levels defined herein. Microsemi also offers numerous other TVS products to  
meet higher and lower power demands and special applications.  
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com  
T-18  
FEATURES  
APPLICATIONS / BENEFITS  
Available in both unidirectional and bidirectional  
(add C or CA suffix to part number for bidirectional)  
Selections for 6.8 to 200 volts breakdown (VBR  
Economical TVS series for thru-hole mounting  
)
Optional 100% screening for avionics grade is  
available by adding MA prefix to part number for added  
100% temperature cycle -55oC to +125oC (10X) as well  
as surge (3X) and 24 hours HTRB with post test VZ &  
IR (in the operating direction for unidirectional or both  
directions for bidirectional)  
Protects sensitive components such as IC’s,  
CMOS, Bipolar, BiCMOS, ECL, DTL, T2L, etc.  
Protection from switching transients & induced RF  
Compliant to IEC61000-4-2 and IEC61000-4-4 for  
ESD and EFT protection respectively  
Secondary lightning protection per IEC61000-4-5  
with 42 Ohms source impedance:  
Options for screening in accordance with MIL-PRF-  
19500 for JAN, JANTX, and JANTXV are available by  
adding MQ, MX, or MV prefixes respectively to part  
numbers.  
Class 1: P6KE6.8 to P6KE130A or CA  
Class 2: P6KE6.8 to P6KE68A or CA  
Class 3: P6KE6.8 to P6KE36A or CA  
Class 4: P6KE6.8 to P6KE18A or CA  
Surface mount equivalents available as SMBJP6KE6.8  
to SMBJP6KE200CA or SMBJ5.0 to SMBJ170CA  
(consult factory for other surface mount options)  
Secondary lightning protection per IEC61000-4-5  
with 12 Ohms source impedance:  
Moisture classification is Level 1 with no dry pack  
required per IPC/JEDEC J-STD-020B  
Class 1: P6KE6.8 to P6KE43A or CA  
Class 2: P6KE6.8 to P6KE22A or CA  
RoHS Compliant devices available by adding “e3” suffix  
MAXIMUM RATINGS  
Peak Pulse Power dissipation at 25oC: 600 watts at  
10/1000 μs (also see Fig 1,2, and 3).  
MECHANICAL AND PACKAGING  
CASE: Void-free transfer molded thermosetting  
epoxy body meeting UL94V-0  
Impulse repetition rate (duty factor): 0.01%  
FINISH: Tin-Lead or RoHS Compliant annealed  
matte-Tin plating readily solderable per MIL-STD-  
750, method 2026  
tclamping (0 volts to V(BR) min.): < 100 ps theoretical for  
unidirectional and < 5 ns for bidirectional  
Operating and Storage temperature: -65oC to +150oC  
MARKING: Body marked with part number  
Thermal Resistance: 25 oC/W at 3/8 inch (10 mm) lead  
length from body, or 85°C/W junction to ambient when  
mounted on FR4 PC board with 4 mm2 copper pads (1  
oz) and track width 1 mm, length 25 mm  
POLARITY: Band denotes cathode. Bidirectional  
not marked  
WEIGHT: 0.7 grams (approximate)  
TAPE & REEL option: Standard per EIA-296 (add  
“TR” suffix to part number)  
Steady-State Power: 5 watts @ TL=25oC 3/8 inch (10  
mm) from body, or 1.47 W when mounted on FR4 PC  
board described for thermal resistance  
See package dimensions on last page  
Forward Voltage at 25oC: 3.5 Volts maximum @ 100  
Amp peak impulse of 8.3 ms half-sine wave  
(unidirectional only)  
Solder temperatures: 260oC for 10 s (maximum)  
Copyright © 2007  
6-20-2007 REV G  
Microsemi  
Page 1  
Scottsdale Division  
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503  

与P6KE120ATRE3相关器件

型号 品牌 获取价格 描述 数据表
P6KE120AU13 RECTRON

获取价格

Trans Voltage Suppressor Diode, 600W, Unidirectional, 1 Element, Silicon, DO-15
P6KE120AU16 RECTRON

获取价格

Trans Voltage Suppressor Diode, 600W, Unidirectional, 1 Element, Silicon, DO-15
P6KE120B DIODES

获取价格

Trans Voltage Suppressor Diode, 600W, Unidirectional, 1 Element, Silicon
P6KE120-B LITTELFUSE

获取价格

TVS DIODE 102V 173.25V DO204AC
P6KE120C PANJIT

获取价格

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 600Watt
P6KE120C SURGE

获取价格

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-6.8 to 440 Volts
P6KE120C TRSYS

获取价格

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
P6KE120C COMCHIP

获取价格

600w Transient Voltage Suppressor
P6KE120C LITTELFUSE

获取价格

Silicon Avalanche Diodes - Silicon Avalanche Diodes
P6KE120C CHENG-YI

获取价格

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR