Film Capacitors
AC Line EMI Suppression and RC Networks – PME271Y A–E Series Metallized Impregnated Paper, Class Y2, 300 VAC
Performance Characteristics
Rated Voltage
Capacitance Range
Capacitance Tolerance
Temperature Range
Climatic Category
Approvals
300 VAC 50/60 Hz
0.001 – 0.15 µF
±ꢀ20%ꢀforꢀCꢀ≤ꢀ0.1µF,ꢀꢀ±ꢀ10%ꢀforꢀCꢀ>ꢀ0.1µF
−40ºCꢀtoꢀ+115°C
40/115/56/B
ENEC, UL, CSA, CQC
MaximumꢀValuesꢀatꢀ+23°C
1 kHz
Dissipation Factor
1.3%
The 100% screening factory test is carried out at 3,000 VDC. The
voltage level is selected to meet the requirements in applicable
equipment standards. All electrical characteristics are checked
after the test. It is not permitted to repeat this test as there is a risk
to damage the capacitor. KEMET is not liable in such case for any
failures.
Test Voltage Between Terminals
Minimum Value Between Terminals
≥ꢀ12,000ꢀMΩ
Insulation Resistance
In DC Applications
Recommendedꢀvoltageꢀ≤ꢀ1,000ꢀVDC
Environmental Test Data
Test
Vibration
IEC Publication
Procedure
IEC 60068–2–6 Test Fc
IEC 60068–2–29 Test Eb
IEC 60068–2–20 Test Ta
IEC 60384–14
3 directions at 2 hours each 10 – 500 Hz at 0.75 mm or 98 m/s2
Bump
4,000 bumps at 390 m/s2
Solderability
Active Flammability
Passive Flammability
Humidity
Solder globule method
IEC 60384–14
Needle-flameꢀtest
IEC 60068–2–3 Test Ca
+40°Cꢀandꢀ90ꢀ–ꢀ95%ꢀRH
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3017_PME271YA_Y2_300 • 5/19/2016
4