PIC12C5XX
8-Pin, 8-Bit CMOS Microcontroller
Devices included in this Data Sheet:
CMOS Technology:
PIC12C508 and PIC12C509 are 8-bit microcontrollers
packaged in 8-lead packages. They are based on the
Enhanced PIC16C5X family.
• Low power, high speed CMOS EPROM
technology
• Fully static design
• Wide operating voltage range:
- Commercial: 2.5V to 5.5V
- Industrial: 2.5V to 5.5V
High-Performance RISC CPU:
• Only 33 single word instructions to learn
• All instructions are single cycle (1 µs) except for
program branches which are two-cycle
• Low power consumption
- < 2 mA @ 5V, 4 MHz
- 15 µA typical @ 3V, 32 KHz
- < 1 µA typical standby current
• Operating speed: DC - 4 MHz clock input
DC - 1 µs instruction cycle
Device
EPROM
RAM
Pin Diagram
PDIP, SOIC
PIC12C508
512 x 12
25
41
PIC12C509
1024 x 12
• 12-bit wide instructions
• 8-bit wide data path
VSS
VDD
GP5/OSC1/CLKIN
GP4/OSC2
1
2
3
4
8
7
6
5
GP0
GP1
• Seven special function hardware registers
• Two-level deep hardware stack
GP3/MCLR/VPP
GP2/T0CKI
• Direct, indirect and relative addressing modes for
data and instructions
• Internal 4 MHz RC oscillator with programmable
calibration
• In-circuit serial programming
Peripheral Features:
• 8-bit real time clock/counter (TMR0) with 8-bit
programmable prescaler
• Power-On Reset (POR)
• Device Reset Timer (DRT)
• Watchdog Timer (WDT) with its own on-chip RC
oscillator for reliable operation
• Programmable code-protection
• Power saving SLEEP mode
• Wake-up from SLEEP on pin change
• Internal pull-ups on I/O pins
• Selectable oscillator options:
- INTRC: Internal 4 MHz RC oscillator
- EXTRC: External low-cost RC oscillator
- XT:
- LP:
Standard crystal/resonator
Power saving, low frequency crystal
• Internal pull-up on MCLR pin
1996 Microchip Technology Inc.
Advance Information
DS40139A-page 1
This document was created with FrameMaker 4 0 4