®
OPA547
High-Voltage, High-Current
OPERATIONAL AMPLIFIER
DESCRIPTION
FEATURES
The OPA547 is a low cost, high-voltage/high-current
operational amplifier ideal for driving a wide variety
of loads. A laser-trimmed monolithic integrated cir-
cuit provides excellent low-level signal accuracy and
high output voltage and current.
● WIDE SUPPLY RANGE
Single Supply: +8V to +60V
Dual Supply: ±4V to ±30V
● HIGH OUTPUT CURRENT:
500mA Continuous
The OPA547 operates from either single or dual sup-
plies for design flexibility. In single supply operation,
the input common-mode range extends below ground.
● WIDE OUTPUT VOLTAGE SWING
● FULLY PROTECTED:
Thermal Shutdown
The OPA547 is internally protected against over-
temperature conditions and current overloads. In addi-
tion, the OPA547 was designed to provide an accurate,
user-selected current limit. Unlike other designs which
use a “power” resistor in series with the output current
path, the OPA547 senses the load indirectly. This
allows the current limit to be adjusted from 0 to
750mA with a 0 to 150µA control signal. This is easily
done with a resistor/potentiometer or controlled digi-
tally with a voltage-out or current-out DAC.
Adjustable Current Limit
● OUTPUT DISABLE CONTROL
● THERMAL SHUTDOWN INDICATOR
● HIGH SLEW RATE: 6V/µs
● LOW QUIESCENT CURRENT
● PACKAGES:
7-Lead TO-220
7-Lead DDPAK Surface-Mount
The Enable/Status (E/S) pin provides two functions.
An input on the pin not only disables the output stage
to effectively disconnect the load but also reduces the
quiescent to conserve power. The E/S pin output can
be monitored to determine if the OPA547 is in thermal
shutdown.
APPLICATIONS
● VALVE, ACTUATOR DRIVER
● SYNCHRO, SERVO DRIVER
● POWER SUPPLIES
The OPA547 is available in an industry-standard
7-lead staggered TO-220 package and a 7-lead DDPAK
surface-mount plastic power package. The copper tab
allows easy mounting to a heat sink or circuit board
for excellent thermal performance. It is specified for
operation over the extended industrial temperature
range, –40°C to +85°C.
● TEST EQUIPMENT
● TRANSDUCER EXCITATION
● AUDIO AMPLIFIER
V+
VI–N
OPA547
VO
VI+N
ILIM
RCL
(0.25W
Signal Resistor)
RCL sets the current limit
value from 0 to 750mA.
E/S
V–
International Airport Industrial Park
•
Mailing Address: PO Box 11400, Tucson, AZ 85734
FAXLine: (800) 548-6133 (US/Canada Only)
•
Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: (520) 746-1111 • Twx: 910-952-1111
Internet: http://www.burr-brown.com/
•
•
Cable: BBRCORP
•
Telex: 066-6491
•
FAX: (520) 889-1510
•
Immediate Product Info: (800) 548-6132
®
©1997 Burr-Brown Corporation
PDS-1326A
Printed in U.S.A. May, 1997
1
OPA547