OPA1611
OPA1612
Burr-Brown Audio
www.ti.com........................................................................................................................................................ SBOS450A –JULY 2009–REVISED AUGUST 2009
™ High-Performance, Bipolar-Input
AUDIO OPERATIONAL AMPLIFIERS
Check for Samples: OPA1611 OPA1612
1
FEATURES
DESCRIPTION
23
•
SUPERIOR SOUND QUALITY
The OPA1611 (single) and OPA1612 (dual)
bipolar-input operational amplifiers achieve very low
1.1nV/√Hz noise density with an ultralow distortion of
0.000015% at 1kHz. The OPA1611 and OPA1612
offer rail-to-rail output swing to within 600mV with a
2kΩ load, which increases headroom and maximizes
dynamic range. These devices also have a high
output drive capability of ±30mA.
•
•
ULTRALOW NOISE: 1.1nV/√Hz at 1kHz
ULTRALOW DISTORTION:
0.000015% AT 1kHz
•
•
HIGH SLEW RATE: 27V/μs
WIDE BANDWIDTH:
40MHz (G = +1)
•
•
•
HIGH OPEN-LOOP GAIN: 130dB
UNITY GAIN STABLE
These devices operate over a very wide supply range
of ±2.25V to ±18V, on only 3.6mA of supply current
per channel. The OPA1611 and OPA1612 op amps
are unity-gain stable and provide excellent dynamic
behavior over a wide range of load conditions.
LOW QUIESCENT CURRENT:
3.6mA (Single), 7.2mA (Dual)
•
•
•
RAIL-TO-RAIL OUTPUT
The dual version features completely independent
circuitry for lowest crosstalk and freedom from
interactions between channels, even when overdriven
or overloaded.
WIDE SUPPLY RANGE: ±2.25V to ±18V
SINGLE AND DUAL VERSIONS AVAILABLE
APPLICATIONS
Both the OPA1611 and OPA1612 are available in
SO-8 packages and are specified from –40°C to
+85°C. SoundPlus ™
•
•
•
•
•
•
PROFESSIONAL AUDIO EQUIPMENT
MICROPHONE PREAMPLIFIERS
ANALOG AND DIGITAL MIXING CONSOLES
BROADCAST STUDIO EQUIPMENT
AUDIO TEST AND MEASUREMENT
HIGH-END A/V RECEIVERS
V+
Pre-Output Driver
OUT
IN+
IN-
V-
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
SoundPlus is a trademark of Texas Instruments Incorporated.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009, Texas Instruments Incorporated