dsPIC33FJ32GP302/304,
dsPIC33FJ64GPX02/X04, and
dsPIC33FJ128GPX02/X04
16-bit Digital Signal Controllers (up to 128 KB Flash and
16K SRAM) with Advanced Analog
Operating Conditions
System Peripherals
• 3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
• 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
• 16-bit dual channel 100 ksps Audio DAC
• Cyclic Redundancy Check (CRC) module
• Up to five 16-bit and up to two 32-bit Timers/
Counters
Clock Management
• Up to four Input Capture (IC) modules
• 2% internal oscillator
• Up to four Output Compare (OC) modules
• Real-Time Clock and Calendar (RTCC) module
• Programmable PLL and oscillator clock sources
• Fail-Safe Clock Monitor (FSCM)
• Independent Watchdog Timer
• Low-power management modes
• Fast wake-up and start-up
Communication Interfaces
• Parallel Master Port (PMP)
• Two UART modules (10 Mbps)
- Supports LIN 2.0 protocols
Core Performance
- RS-232, RS-485, and IrDA® support
• Up to 40 MIPS 16-bit dsPIC33F CPU
• Single-cycle MUL plus hardware divide
• Two 4-wire SPI modules (15 Mbps)
• Enhanced CAN (ECAN) module (1 Mbaud) with
2.0B support
Advanced Analog Features
• I2C module (100K, 400K and 1Mbaud) with
SMbus support
• Data Converter Interface (DCI) module with I2S
codec support
• 10/12-bit ADC with 1.1Msps/500 ksps rate:
- Up to 13 ADC input channels and four S&H
- Flexible/Independent trigger sources
• 150 ns Comparators:
- Up to two Analog Comparator modules
- 4-bit DAC with two ranges for Analog Comparators
Direct Memory Access (DMA)
• 8-channel DMA with no CPU stalls or overhead
• UART, SPI, ADC, ECAN, IC, OC, INT0
Input/Output
• Software remappable pin functions
• 5V-tolerant pins
Qualification and Class B Support
• AEC-Q100 REVG (Grade 0 -40ºC to +150ºC)
• Class B Safety Library, IEC 60730, VDE certified
• Selectable open drain and internal pull-ups
• Up to 5 mA overvoltage clamp current/pin
• Multiple external interrupts
Debugger Development Support
• In-circuit and in-application programming
• Two program breakpoints
• Trace and run-time watch
Packages
Type
SPDIP
SOIC
QFN-S
28
QFN
44
TQFP
44
Pin Count
I/O Pins
28
21
28
21
21
35
35
Contact Lead/Pitch
Dimensions
.100”
1.27
0.65
0.65
8x8x0.9
0.80
.285x.135x1.365”
7.50x2.05x17.9
6x6x0.9
10x10x1
Note: All dimensions are in millimeters (mm) unless specified.
© 2007-2012 Microchip Technology Inc.
DS70292G-page 1