NOIV1SN1300A,
NOIV2SN1300A
VITA 1300 1.3 Megapixel
150 FPS Global Shutter
CMOS Image Sensor
http://onsemi.com
Features
• SXGA: 1280 x 1024 Active Pixels
• 4.8 mm x 4.8 mm Pixel Size
• 1/2 inch Optical Format
• Monochrome (SN) or Color (SE)
• 150 Frames per Second (fps) at Full Resolution (LVDS)
• 37 Frames per Second (fps) at Full Resolution (CMOS)
• On-chip 10-bit Analog-to-Digital Converter (ADC)
• 8-bit or 10-bit Output Mode
• Four LVDS Serial Outputs or Parallel CMOS Output
• Random Programmable Region of Interest (ROI) Readout
• Pipelined and Triggered Global Shutter, Rolling Shutter
• On-chip Fixed Pattern Noise (FPN) Correction
• Serial Peripheral Interface (SPI)
• Automatic Exposure Control (AEC)
• Phase Locked Loop (PLL)
• High Dynamic Range (HDR)
Figure 1. VITA 1300 Photograph
• Dual Power Supply (3.3 V and 1.8 V)
• −40°C to +85°C Operational Temperature Range
• 48-pin LCC and Bare Die
• 475 mW Power Dissipation (LVDS)
• 290 mW Power Dissipation (CMOS)
• These Devices are Pb−Free and are RoHS Compliant
Applications
• Machine Vision
• Motion Monitoring
• Security
• Barcode Scanning (2D)
Description
The VITA 1300 is a 1/2 inch Super-eXtended Graphics Array (SXGA) CMOS image sensor with a pixel array of 1280 by 1024.
The high sensitivity 4.8 mm x 4.8 mm pixels support pipelined and triggered global shutter readout modes and can also be
operated in a low noise rolling shutter mode. In rolling shutter mode, the sensor supports correlated double sampling readout,
reducing noise and increasing the dynamic range.
The sensor has on-chip programmable gain amplifiers and 10-bit A/D converters. The integration time and gain parameters
can be reconfigured without any visible image artifact. Optionally the on-chip automatic exposure control loop (AEC) controls
these parameters dynamically. The image’s black level is either calibrated automatically or can be adjusted by adding a user
programmable offset.
A high level of programmability using a four wire serial peripheral interface enables the user to read out specific regions
of interest. Up to 8 regions can be programmed, achieving even higher frame rates.
The image data interface of the V1-SN/SE part consists of four LVDS lanes, facilitating frame rates up to 150 frames per
second. Each channel runs at 620 Mbps. A separate synchronization channel containing payload information is provided to
facilitate the image reconstruction at the receive end. The V2-SN/SE part provides a parallel CMOS output interface at reduced
frame rate.
The VITA 1300 is packaged in a 48-pin LCC package and is available in a monochrome and color version.
Contact your local ON Semiconductor office for more information.
© Semiconductor Components Industries, LLC, 2013
1
Publication Order Number:
June, 2013 − Rev. 9
NOIV1SN1300A/D