NIN Series
Molded Chip Wirewound Inductors
FEATURES
RoHS
• EIA SIZES A (1210), B (1812), C (1008) AND D (0805)
Compliant
includes all homogeneous materials
• EXCELLENT HIGH Q AND HIGH SRF CHARACTERISTICS
• BOTH FLOW AND REFLOW SOLDERING APPLICABLE
• HIGH INDUCTANCE AVAILABLE IN SMALL SIZE
*See Part Number System for Details
• EMBOSSED PLASTIC TAPE PACKAGE FOR AUTOMATIC PICK-PLACE
AVAILABLE TYPE AND RANGE
Inductance
Range
EIA Size
Size Code Size (L x W x H mm)
NIC Type
Style
0805
D
2.0 x 1.25 x 1.25
NIN-ND
NIN-FC
NIN-NC
NIN-PC
NIN-FA
NIN-NA
NIN-PA
NIN-FB
10nH ~ 1.0μH
0.22 ~ 100μH
10nH ~ 0.82μH
1.0 ~ 33μH
0.22 ~ 220μH
47nH ~ 8.2μH
1.0 ~ 330μH
0.1 ~ 1000μH
Standard
Standard
High Frequency
High Curret
Standard
High Frequency
High Current
Standard
1008
C
2.5 x 2.0 x 1.6
1210
1812
A
B
3.2 x 2.5 x 2.2
4.5 x 3.2 x 3.2
SPECIFICATIONS
Case Size
Specifications
0805
1008
1210
1812
Inductance Range
Inductance Tolerance
10nH ~ 1.0μH
±10% (K), ±5% (J)
10nH ~ 100μH
47nH ~ 330μH
0.10μH ~ 1000μH
±10% (K), ±5% (J)
±20% (M), ±10% (K), ±5% (J)
-25°C ~ +85°C (at 100% of rated voltage)
1,000 MegOhm Min. (@ 100Vdc, Termination to Case)
250Vdc for 1 minute (Termination to Case)
Operating Temperature Range
Insulation Resistance
Withstanding Voltage
Q Factor, Self Resonant Frequency,
DC Resistance, Rated DC Current
and Inductance Tolerance
See Individual Product Listings
ENVIRONMENTAL CHARACTERISTICS
Test
Specification
Test Method & Condition
Solderability
Humidity
Soldering Effect
Low Frequency Vibration
Thermal Shock
90% Min. Coverage
After 3 Sec. Dip in +230°C Solder Pot (Post Flux)
After 500 Hrs at +60°C and 90~95% RH
After 5 Sec. at +260°C (5 min. 120°C Pre-Heat)
After 2 Hrs per Axis, 10 ~ 55Hz, 1.5mm Amplitude
After 100 Cycles (-40°C ~ +85°C) 30 Min. Each
After 500 Hrs at -40°C
(1) No Evidence of Damage
(2) Inductance Shall Be Within
±5% of Initial Value
(3) Q Factor Shall Be Within
±10% of Initial Value
Low Temperature Storage
High Temperature Load
Life
(1) No Evidence of Damage
(2) Inductance Shall Be Within
±10% of Initial Value
After 500 Hrs. at +85°C with Rated DC Current
(3) Q Factor Shall Be Within
±10% of Initial Value
After 500 Hrs at +60°C with 90~95% RH
at Rated DC Current
Humidity Load Life
®
NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
27