NCV59749
3.0 A, Dual-Rail Very
Low‐Dropout Linear
Regulator with
Programmable Soft‐Start
www.onsemi.com
The NCV59749 is dual−rail very low dropout voltage regulator that
is capable of providing an output current in excess of 3.0 A with a
dropout voltage of 120 mV typ. at full load current. The devices are
stable with ceramic and any other type of output capacitor ≥ 2.2 mF.
This series contains adjustable output voltage version with output
voltage down to 0.8 V. Internal protection features consist of built−in
thermal shutdown and output current limiting protection.
User−programmable Soft−Start and Power Good pins are available.
The NCV59749 is available in QFN20 5x5 package.
QFN20
CASE 485DB
PIN CONNECTIONS
Features
• Output Current in Excess of 3.0 A
5
4
3
2
1
6
7
20
19
18
17
16
OUT
OUT
OUT
NC
IN
IN
• V Range: 0.8 V to 5.5 V
IN
• V
Range: 2.7 V to 5.5 V
8
IN
GND
BIAS
9
PG
• Output Voltage Range: 0.8 V to 3.6 V
• Dropout Voltage: 120 mV at 3 A
• Programmable Soft Start
10
BIAS
FB
11 12 13 14 15
• Open Drain Power Good Output
• Fast Transient Response
• Stable with Any Type of Output Capacitor ≥ 2.2 mF
• Current Limit and Thermal Shutdown Protection
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These are Pb−Free Devices
QFN20, 5x5, 0.65P
MARKING DIAGRAM
1
NCV59749
AWLYYWWG
G
Applications
QFN20
• Automotive, Consumer and Industrial Equipment Point of Load
Regulation
A
WL
YY
WW
G
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb-Free Package
• FPGA, DSP and Logic Power Supplies
• Switching Power Supply Post Regulation
(Note: Microdot may be in either location)
NCV59749
ORDERING INFORMATION
See detailed ordering, marking and shipping information in the
package dimensions section on page 9 of this data sheet.
Figure 1. Typical Application Schematic
© Semiconductor Components Industries, LLC, 2017
1
Publication Order Number:
February, 2017 − Rev. 1
NCV59749/D