NCV47821
3.3 V to 20 V Adjustable Dual
LDO with Adjustable Current
Limit and Diagnostic Features
The NCV47821 dual channel LDO regulator with 200 mA per
channel is designed for use in harsh automotive environments. The
device has a high peak input voltage tolerance and reverse input voltage,
reverse bias, overcurrent and overtemperature protections. The
integrated current sense feature (adjustable by resistor connected to
CSO pin for each channel) provides diagnosis and system protection
functionality. The CSO pin output current creates voltage drop across
CSO resistor which is proportional to output current of each channel.
Extended diagnostic features in OFF state are also available and
controlled by dedicated input and output pins.
www.onsemi.com
MARKING
DIAGRAM
14
NCV4
7821
ALYWG
G
TSSOP−14
Exposed Pad
CASE 948AW
14
1
1
Features
A
L
Y
W
G
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
• Adjustable Outputs: 3.3 V to 20 V 3% Output Voltage
• Output Current per Channel: up to 200 mA
• Two Independent Enable Inputs (3.3 V Logic Compatible)
• Adjustable Current Limits: up to 300 mA
(Note: Microdot may be in either location)
• Protection Features:
♦ Current Limitation
♦ Thermal Shutdown
♦ Reverse Input Voltage and Reverse Bias Voltage
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 14 of this data sheet.
• Diagnostic Features:
♦ Short To Battery (STB) and Open Load (OL) in OFF State
♦ Internal Components for OFF State Diagnostics
♦ Open Collector Flag Output
• AEC−Q100 Grade 1 Qualified and PPAP Capable
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Typical Applications
• Audio and Infotainment System
• Active Safety System
Vout1
Vin
Cin
R11
Cb1*
1 μF
Cout1
ADJ1
CSO1
10 μF
EN1
To A /D
CCSO1
RCSO1
R12
NCV47821
(Dual LDO)
1 μF
Diagnostic Enable Input
DE
CS
Error Flag Output (Open Collector)
EF
Diagnostic Channel Select Input
Vout2
R21
Cb2*
Cout2
ADJ2
CSO2
EN2
10 μF
To A /D
CCSO2
RCSO2
R22
GND
1 μF
Cb1* and Cb2* are optional for stability with ceramic output capacitors
Figure 1. Application Schematic
(See Application Section for More Details)
© Semiconductor Components Industries, LLC, 2017
1
Publication Order Number:
January, 2017 − Rev. 2
NCV47821/D