MC33201, MC33202,
MC33204, NCV33202,
NCV33204
Low Voltage, Rail−to−Rail
Operational Amplifiers
http://onsemi.com
The MC33201/2/4 family of operational amplifiers provide
rail−to−railoperation on both the input and output. The inputs can be
driven as high as 200 mV beyond the supply rails without phase
reversal on the outputs, and the output can swing within 50 mV of each
rail. This rail−to−rail operation enables the user to make full use of the
supply voltage range available. It is designed to work at very low
supply voltages (± 0.9 V) yet can operate with a supply of up to +12 V
and ground. Output current boosting techniques provide a high output
current capability while keeping the drain current of the amplifier to a
minimum. Also, the combination of low noise and distortion with a
high slew rate and drive capability make this an ideal amplifier for
audio applications.
PDIP−8
P, VP SUFFIX
CASE 626
8
1
SOIC−8
D, VD SUFFIX
8
CASE 751
1
Micro8]
• Low Voltage, Single Supply Operation
(+1.8 V and Ground to +12 V and Ground)
• Input Voltage Range Includes both Supply Rails
DM SUFFIX
8
CASE 846A
1
• Output Voltage Swings within 50 mV of both Rails
• No Phase Reversal on the Output for Over−driven Input Signals
PDIP−14
P, VP SUFFIX
CASE 646
• High Output Current (I = 80 mA, Typ)
SC
• Low Supply Current (I = 0.9 mA, Typ)
D
14
• 600 W Output Drive Capability
1
• Extended Operating Temperature Ranges
(−40° to +105°C and −55° to +125°C)
• Typical Gain Bandwidth Product = 2.2 MHz
• NCV Prefix for Automotive and Other Applications Requiring Site
and Control Changes
SOIC−14
D, VD SUFFIX
CASE 751A
14
14
1
• Pb−Free Packages are Available
TSSOP−14
DTB SUFFIX
CASE 948G
1
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 10 of this data sheet.
DEVICE MARKING INFORMATION
See general marking information in the device marking
section on page 12 of this data sheet.
©
Semiconductor Components Industries, LLC, 2006
1
Publication Order Number:
October, 2006 − Rev. 14
MC33201/D