LDO Regulator - Ultra-Low
Iq, Dual Power Mode
50ꢀnA, 80ꢀmA
NCP171
The NCP171 is a Dual mode LDO offering up to 80 mA in Active
Mode and as low as 50 nA of Iq in Low Power Mode. The Dual Mode
function is selectable with the ECO pin allowing for dynamic
switching between Active and Low Power Modes, ideal in long life
battery powered applications.
www.onsemi.com
The output Voltage in Low Power mode can be lowered by an
internally factory programmed value ranging 50 mV, 100 mV, 150 mV
or 200 mV with respect to the nominal output voltage in Active Mode.
This feature further lowers the application consumption in sleep mode.
The NCP171 is in the SLIQ (Super Low Iq) LDO family and is
available in small XDFN4 1.2 x 1.2 package.
1
XDFN4 1.2x1.2
AM SUFFIX
CASE 711BC
Features
MARKING DIAGRAM
• Operating Input Voltage Range: 1.7 V to 5.5 V
• Output Voltage Range: 0.6 V to 3.3 V (50 mV steps)
XXM
1
• Low Power Mode / Active Mode Externally Controlled by ECO pin
• Internally Factory Programmable Output Voltage Offset for Low
Power/Active Mode to 50 mV, 100 mV, 150 mV, 200 mV
• Quiescent Current of 50 nA at No Load, (Low Power mode)
• Maximum Current 80 mA in Active Mode and 5 mA in Low Power
Mode
XX = Specific Device Code
M
= Date Code
PIN CONNECTIONS
• Low Dropout: 41 mV Typ. at 80 mA (Vout = 3.3 V)
•
2% Output Voltage Accuracy in Active Mode
ENA
ECO
4
3
IN
• High PSRR: 65 dB at 1 kHz in Active Mode
• Active Output Discharge for Fast Output Turn−Off
• Current Limitation, Thermal Shutdown
• Available in Small XDFN4 1.2x1.2 Package
• These are Pb−Free Devices
GND
1
2
OUT
(Top View)
Typical Applications
• IoT
ORDERING INFORMATION
See detailed ordering, marking and shipping information on
page 20 of this data sheet.
• RFID
• Portable Communication Equipment
• Consumer Electronics
Figure 1. Typical Application Schematic
© Semiconductor Components Industries, LLC, 2018
1
Publication Order Number:
December, 2019 − Rev. 2
NCP171/D