NCP1393B
High-Voltage Half-Bridge
Driver with Inbuilt
Oscillator
The NCP1393B is a self−oscillating high voltage MOSFET driver
primarily tailored for the applications using half−bridge topology. Due
to its proprietary high−voltage technology, the driver accepts bulk
voltages up to 600 V. Operating frequency of the driver can be
adjusted from 25 kHz to 250 kHz using a single resistor. Adjustable
brown−out protection assures correct bulk voltage operating range. An
internal 100 ms PFC delay timer guarantees that the main downstream
converter will be turned on in the time the bulk voltage is fully
stabilized. The device provides fixed dead−time which helps to lower
the shoot−through current.
http://onsemi.com
MARKING
DIAGRAMS
8
8
1393B
1
ALYWW
SOIC−8
CASE 751
G
1
Features
A
L
Y
WW
G
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
• Wide Operating Frequency Range − from 25 kHz to 250 kHz
• Minimum Frequency Adjust Accuracy $3%
• Fixed Dead Time − 0.6 ms
• Adjustable Brown−out Protection for a Simple PFC Association
• 100 ms PFC Delay Timer
• Latched Input for Severe Fault Conditions, e.g. Overtemperature or
PINOUT
OVP
VCC
Rt
Vboot
Mupper
HB
• Internal 16 V V Clamp
CC
• Low Startup Current of 50 mA Maximum
• 1 A / 0.5 A Peak Current Sink / Source Drive Capability
• Operation up to 600 V Bulk Voltage
• Internal Temperature Shutdown
• SOIC−8 Package
BO
GND
Mlower
• These are Pb−Free Devices
ORDERING INFORMATION
†
Device
NCP1393BDR2G
Package
Shipping
2500 /
Tape & Reel
Typical Applications
SOIC−8
(Pb−Free)
• Flat Panel Display Power Converters
• Low Cost Resonant SMPS
• High Power AC/DC Adapters for Notebooks
• Offline Battery Chargers
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
• Lamp Ballasts
© Semiconductor Components Industries, LLC, 2008
1
Publication Order Number:
October, 2008 − Rev. 1
NCP1393/D