NCP1377, NCP1377B
PWM Current−Mode
Controller for Free−Running
Quasi−Resonant Operation
The NCP1377 combines a true current mode modulator and a
demagnetization detector which ensures full borderline/critical
Conduction Mode in any load/line conditions together with
minimum drain voltage switching (Quasi−Resonant operation). Due
to its inherent skip cycle capability, the controller enters burst mode
as soon as the power demand falls below a predetermined level. As
this happens at low peak current, no audible noise can be heard. For
NCP1377, an internal 8.0 ms timer prevents the free−run frequency to
exceed 100 kHz (therefore below the 150 kHz CISPR−22 EMI
starting limit), while the skip adjustment capability lets the user
select the frequency at which the burst foldback takes place. For
NC1377B, the internal timer duration is reduced to 3.0 ms to allow
operation at higher frequencies (up to 300 kHz).
http://onsemi.com
MARKING DIAGRAMS
SOIC−8
D SUFFIX
CASE 751
8
1
8
1
1377
ALYW
1377B
ALYW
8
1
PDIP−7
P SUFFIX
CASE 626B
The transformer core reset detection is done through an auxiliary
winding which, brought via a dedicated pin, also enables fast
Over Voltage Protection (OVP). Once an OVP has been detected, the
IC permanently latches off. The 1377 features a sampling time of
4.5 ms whereas it is 1.5 ms for the B version.
1377P
AWL
1377BP
AWL
YYWW
YYWW
The NCP1377 also features an efficient protective circuitries
which, in presence of an overcurrent condition, disables the output
pulses and enters a safe burst mode, trying to restart. Once the default
has gone, the device auto−recovers. Finally an internal 1.0 ms
Soft−Start eliminates the traditional startup stress.
1
1
8
1
A
= Assembly Location
WL, L = Wafer Lot
YY, Y = Year
WW, W = Work Week
Features
PIN CONNECTIONS
• Pb−Free Package is Available
• Free−Running Borderline/Critical Mode Quasi−Resonant Operation
• Latched Overvoltage Protection
• Auto−Recovery Short−Circuit Protection Via UVLO Crossover
• External Latch Triggering, e.g. Via Overtemperature Signal
• Current−Mode with Adjustable Skip Cycle Capability
• Internal 1.0 ms Soft−Start
Dmg
HV
1
2
3
4
8
FB
CS
V
CC
6
5
GND
Drv
(Top View)
• Internal Temperature Shutdown
• Internal Leading Edge Blanking
ORDERING INFORMATION
• 500 mA Peak Current Source/Sink Capability
• Under Voltage Lockout Level of 12.5 V (On) and 7.5 V (Min)
• Direct Optocoupler Connection
†
Device
Package
Shipping
NCP1377DR2
SOIC−8
2500 Tape & Reel
2500 Tape & Reel
NCP1377DR2G
SOIC−8
(Pb−Free)
• SPICE Models Available for TRANsient Analysis
• Internal Minimum T
OFF
NCP1377BDR2
NCP1377P
SOIC−8
PDIP−7
PDIP−7
2500 Tape & Reel
50 Units/Tube
50 Units/Tube
Typical Applications
NCP1377BP
• AC−DC Adapters for Notebooks, etc.
• Offline Battery Chargers
• Consumer Electronics (DVD Players, Set−Top Boxes, TVs, etc.)
• Auxiliary Power Supplies (USB, Appliances, TVs, etc.)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Semiconductor Components Industries, LLC, 2004
1
Publication Order Number:
October, 2004 − Rev. 1
NCP1377/D