NCL30073
Current-Mode PWM
Controller for LED
Application
The NCL30073 is a highly integrated PWM controller capable of
delivering a rugged and high performance LED converter in a tiny
TSOP−6 package. With a supply range up to 24 V, the controller hosts
a 65 kHz switching circuitry operated in peak current mode control.
When the voltage on FB pin decreases, the controller enters skip cycle
while limiting the peak current.
www.onsemi.com
1
Over Power Protection (OPP) is a difficult exercise especially when
no−load standby requirements drive the converter specifications. The
ON proprietary integrated OPP lets you harness the maximum
delivered power without affecting your standby performance simply
via two external resistors. An Over Voltage Protection is also
TSOP−6
CASE 318G−02
MARKING DIAGRAM
combined on the same pin but also on the V line. They offer an
CC
efficient protection in case of adverse open loop operation.
Finally, a timer−based short−circuit protection offers the best
protection scheme, letting you precisely select the protection trip point
without caring of a loose coupling between the auxiliary and the power
windings.
73AAYWG
G
1
73A = Specific Device Code
A
Y
W
G
=Assembly Location
= Year
= Work Week
Features
• Fixed−frequency 65 kHz Current−mode Control Operation
• Internal and Adjustable Over Power Protection (OPP) Circuit
• Internal Ramp Compensation
= Pb−Free Package
(Note: Microdot may be in either location)
• Internally Fixed 4 ms Soft−start
PIN CONNECTIONS
• 115 ms Timer−based Auto−recovery Short−circuit Protection
• Protection − Autorecovery
OPP
FB
VCC
DRV
GND
♦ OVP by V
♦ OIP
CC
♦ OTP − Foldback
♦ Short Circuit
CS
TSOP−6 (Top view)
• Up to 24 V V Operation
CC
• Extremely Low No−load Standby Power
• Isolated and Non−isolated Outputs
• Good Regulation – 5%
ORDERING INFORMATION
†
Device
NCL30073SN065T1G
Package
Shipping
• High Power Factor > 0.9
TSOP−6
3000 / Tape
& Reel
• Single Winding Inductor
(Pb−Free)
• Low Parts Count
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
• EPS 2.0 Compliant
• Pb−Free Devices
• +300 mA/ −500 mA Source/Sink Drive Capability
Typical Application
• Dimmable Retrofit and Low Power Fixture LED Applications
• Phase Cut Dimmer Compatible – LE or TE Types
• Multiple Topology Support
♦ Buck
♦ Buck Boost
♦ Flyback
© Semiconductor Components Industries, LLC, 2017
1
Publication Order Number:
May, 2017 − Rev. 1
NCL30073/D