DATA SHEET
www.onsemi.com
High Speed Dual-Channel,
Bi-Directional Ceramic
Digital Isolator
NCID9210 / NCID9216
SOIC16 W
CASE 751EN
Description
The NCID9210 and NCID9216 are galvanically isolated full
duplex, bi−directional, high−speed dual−channel digital isolators.
These devices support isolated communications thereby allowing
digital signals to communicate between systems without conducting
ground loops or hazardous voltages.
MARKING DIAGRAM
They utilize onsemi’s patented galvanic off−chip capacitor isolation
technology and optimized IC design to achieve high insulation and
high noise immunity, characterized by high common mode rejection
and power supply rejection specifications. The thick ceramic substrate
yields capacitors with ~25 times the thickness of thin film on−chip
capacitors and coreless transformers. The result is a combination of
the electrical performance benefits that digital isolators offer with the
safety reliability of a >0.5 mm insulator barrier similar to what has
historically been offered by optocouplers.
AWLYWW
9210
A
= Assembly Location
WL = Wafer Lot
= Year
WW = Work Week
9210/9216 = Specific Device Code
Y
The device is housed in a 16−pin wide body small outline package.
Features
ORDERING INFORMATION
See detailed ordering and shipping information on page 10 of
this data sheet.
• Off−Chip Capacitive Isolation to Achieve Reliable High Voltage
Insulation
♦ DTI (Distance Through Insulation): ≥ 0.5 mm
♦ Maximum Working Insulation Voltage: 2000 V
• Full Duplex, Bi−directional Communication
• 100 KV/ms Minimum Common Mode Rejection
peak
• High Speed:
♦ 50 Mbit/s Data Rate (NRZ)
♦ 25 ns Maximum Propagation Delay
♦ 10 ns Maximum Pulse Width Distortion
• 8 mm Creepage and Clearance Distance to Achieve Reliable High
Voltage Insulation.
• Specifications Guaranteed Over 2.5 V to 5.5 V Supply Voltage and
−40°C to 125°C Extended Temperature Range
• Over Temperature Detection
• NCIV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable (Pending)
• Safety and Regulatory Approvals
♦ UL1577, 5000 V
for 1 Minute
RMS
♦ DIN EN/IEC 60747−17 (Pending)
Typical Applications
• Isolated PWM Control
• Programmable Logic Control
• Isolated Data Acquisition System
• Voltage Level Translator
• Industrial Fieldbus Communications
2
• Microprocessor System Interface (SPI, I C, etc.)
© Semiconductor Components Industries, LLC, 2020
1
Publication Order Number:
NCID9210/D
September, 2021 − Rev. 1