MX25V5126F
2.3V-3.6V 512K-BIT [x 1/x 2] CMOS SERIAL FLASH
1. FEATURES
SOFTWARE FEATURES
GENERAL
•ꢀꢀꢀ InputꢀDataꢀFormat:ꢀ1-byteꢀCommandꢀcode
•ꢀꢀ Supports Serial Peripheral Interface - Mode 0 and Mode 3
•ꢀꢀꢀ BlockꢀLockꢀprotection:ꢀTheꢀBP0-BP3ꢀstatusꢀbitꢀdefinesꢀ
the size of the area to be software protected against
Program and Erase instructions.
•ꢀꢀ 524,288ꢀxꢀ1ꢀbitꢀstructureꢀorꢀ262,144ꢀxꢀ2ꢀbitsꢀ(DualꢀOutputꢀ
mode) Structure
•ꢀꢀ Equalꢀ Sectorsꢀ withꢀ 4Kꢀ byteꢀ each,ꢀ orꢀ Equalꢀ Blocksꢀ withꢀ
•ꢀꢀꢀ AutoꢀEraseꢀandꢀAutoꢀProgramꢀAlgorithm
32K/64K byte each
ꢀꢀꢀ -ꢀ Automaticallyꢀ erasesꢀ andꢀ verifiesꢀ dataꢀ atꢀ selectedꢀ
sector
- Any Block can be erased individually
ꢀꢀꢀꢀ -ꢀAutomaticallyꢀprogramsꢀandꢀverifiesꢀdataꢀatꢀselectedꢀ
page by an internal algorithm that automatically times
the program pulse widths (Any page to be programed
shouldꢀhaveꢀpageꢀinꢀtheꢀerasedꢀstateꢀfirst)
•ꢀꢀꢀ SingleꢀPowerꢀSupplyꢀOperation
- 2.3 to 3.6 volts for read, erase, and program operations
•ꢀꢀꢀ Latch-upꢀprotectedꢀtoꢀ100mAꢀfromꢀ-1VꢀtoꢀVccꢀ+1V
•
•
Status Register Feature
ElectronicꢀIdentification
PERFORMANCE
- JEDEC 2-byte Device ID
ꢀ •ꢀꢀꢀ HighꢀPerformance
- RES command, 1-byte Device ID
SupportsꢀUniqueꢀIDꢀ(PleaseꢀcontactꢀlocalꢀMacronix
- Fast Read:
•
- 1 I/O:
sales for detail information)
104MHz with 8 dummy cycles (2.7V-3.6V)
80MHz with 8 dummy cycles (2.3V-2.7V)
- 2 I/O for DREAD instructions:
104MHz with 4 dummy cycles (2.7V-3.6V)
80MHz with 4 dummy cycles (2.3V-2.7V)
- Fast program time: 1.6ms /page (256-byte)
- Byte program time: 20us
HARDWARE FEATURES
•
SCLK Input
-
Serial clock input
•ꢀꢀꢀ SI/SIO0ꢀ
- Serial Data Input or Serial Data Output for Dual
output mode
•ꢀꢀꢀ SO/SIO1
- Fast erase time:
50ms(typ.)/sector (4K-byte per sector);
0.3s(typ.)/block (32K-byte per block);
0.6s(typ.)/block (64K-byte per block);
1.8s(typ.)/chip.
- Serial Data Output or Serial Data Output for Dual
output mode
•ꢀꢀꢀ WP#ꢀpin
- Hardware write protection
•ꢀꢀꢀ PACKAGE
ꢀ ꢀ•ꢀLowꢀPowerꢀConsumption
- 8-USON (2x3mm)
- Low active read current: 6mA(max.) at 50MHz
- Low active programming current: 5mA (typ.)/page
- Low active sector erase current: 5mA (typ.)
- Low standby current: 5uA (typ.)
- 8-pin TSSOP (173mil)
- 8-pin SOP (150mil)
All devices are RoHS compliant and Halogen-free
- Deep power-down mode: 1uA (typ.)
•ꢀꢀMinimumꢀ100,000ꢀerase/programꢀcycles
•ꢀꢀ20ꢀyearsꢀdataꢀretention
Macronix Proprietary
P/N: PM2605
Rev. 1.1, September 03, 2020
4