Datasheet > MVPLAD15KP20CA

MVPLAD15KP20CA

更新时间： 2024-11-24 09:13:39

品牌	Logo	应用领域
美高森美 - MICROSEMI		/
页数	文件大小	规格书
5页	215K
描述
Trans Voltage Suppressor Diode, 15000W, 20V V(RWM), Bidirectional, 1 Element, Silicon, PLASTIC PACKAGE-1

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

MVPLAD15KP20CA 数据手册

PLAD15KP5.0 thru PLAD15KP400CA, e3

15,000 W SURFACE MOUNT TRANSIENT

VOLTAGE SUPPRESSOR

S C O T T S D A L E D I V I S I O N

DESCRIPTION

APPEARANCE

These Microsemi 15 kW Transient Voltage Suppressors (TVSs)

are designed for applications requiring protection of voltage-

sensitive electronic devices that may be damaged by harsh or

severe voltage transients including lightning per IEC61000-4-5 and

classes with various source impedances described herein. This

series is available in 5.0 to 400 volt standoff voltages (V_WM) in both

unidirectional and bidirectional offered in one surface mount

device. Microsemi also offers numerous other TVS products to

meet higher and lower power demands and special applications.

IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com

FEATURES

APPLICATIONS / BENEFITS

•

Available in both Unidirectional and Bidirectional

construction (Bidirectional with C or CA suffix)

• Protection from switching transients and induced RF

• Protection from ESD, and EFT per IEC 61000-4-2

•

Low profile surface mount

and IEC 61000-4-4

Available in tape-and-reel or waffle pack

Selections for 5.0 to 400 volts standoff voltages (V_WM

• Secondary lightning protection per IEC61000-4-5 with

42 Ohms source impedance:

Class 1,2,3,4: PLAD15KP5.0A to 400A or CA

Class 5: PLAD15KP5.0A to 400A or CA

)

Suppresses transients up to 15,000 watts @ 10/1000 µs

(see Figure 1)

• Secondary lightning protection per IEC61000-4-5 with

•

Fast response

12 Ohms source impedance:

Optional 100% screening for avionics grade is

available by adding MA prefix to part number for added

100% temperature cycle -55^oC to +125^oC (10X) as well

as surge (3X) and 24 hours HTRB with post test V_Z&

I_R(in the operating direction for unidirectional or both

directions for bidirectional)

Class 1,2,3,4: PLAD15KP5.0A to 400A or CA

• Secondary lightning protection per IEC61000-4-5 with

2 Ohms source impedance:

Class 2,3: PLAD15KP5.0A to 400A or CA

Class 4: PLAD15KP5.0 to 54A or CA

•

Options for screening in accordance with MIL-PRF-

19500 for JAN, JANTX, and JANTXV are also available

by adding MQ, MX, or MV prefixes respectively to part

numbers.

• Pin injection protection per RTCA/DO-160D for

Waveform 4 (6.4/69 µs):

Level 4: PLAD15KP5.0A to 400A or CA

Level 5: PLAD15KP5.0A to 100A or CA

•

Moisture classification is Level 1 with no dry pack

required per IPC/JEDEC J-STD-020B

• Pin injection protection per RTCA/DO-160D for

Waveform 5A (40/120 µs):

Level 4: PLAD15KP5.0A to 28A or CA

RoHS compliant devices available by adding “e3” suffix

MAXIMUM RATINGS

MECHANICAL AND PACKAGING

• Operating and Storage temperature: -55^ºC to +150^ºC

•

CASE: Void-free transfer molded thermosetting

epoxy body meeting UL94V-0

• Peak Pulse Power dissipation at 25^ºC: 15,000 watts at

10/1000 μs (also see Figures 1 and 2)

TERMINALS: Tin-Lead or RoHS Compliant

annealed matte-Tin plating readily solderable per

MIL-STD-750, method 2026

• Impulse repetition rate (duty factor): 0.05%

• t_clamping(0 volts to V_(BR)min.): < 100 ps theoretical for

•

MARKING: Body marked with part number

unidirectional and < 5 ns for bidirectional

• Thermal resistance: 0.2 C/W junction to case or 50^ºC/W

junction to ambient when mounted on FR4 PC board with

recommended mounting pad (see last page)

POLARITY: For unidirectional devices, the cathode

is on the metal backside (package bottom)

•

WEIGHT: 1 gram (approximate)

• Steady-State Power dissipation: 50 watts at T_C= 100^oC

with good heat sink, or 2.5 watts at T_A= 25^ºC if mounted on

FR4 PC board as described for thermal resistance

TAPE & Reel: Standard per EIA-481-B (add “TR”

suffix to part number)

•

See package dimensions on last page

• Forward Surge Voltage: 3.5 V maximum @ 500 Amps 8.3

ms half-sine wave (unidirectional devices only)

• Solder temperatures: 260 ^ºC for 10 s (maximum)

10-12-2007 REV G

Microsemi

Page 1

Scottsdale Division

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

12 3 4 5

中文翻译

下载PDF

与MVPLAD15KP20CA相关器件

型号	品牌	获取价格	描述	数据表
MVPLAD15KP20CAE3	MICROSEMI	获取价格	Trans Voltage Suppressor Diode, 15000W, 20V V(RWM), Bidirectional, 1 Element, Silicon, ROH
MVPLAD15KP20CAE3TR	MICROSEMI	获取价格	Trans Voltage Suppressor Diode, 15000W, 20V V(RWM), Bidirectional, 1 Element, Silicon, ROH
MVPLAD15KP20CE3	MICROSEMI	获取价格	Trans Voltage Suppressor Diode, 15000W, 20V V(RWM), Bidirectional, 1 Element, Silicon, ROH
MVPLAD15KP20CE3TR	MICROSEMI	获取价格	Trans Voltage Suppressor Diode, 15000W, 20V V(RWM), Bidirectional, 1 Element, Silicon, ROH
MVPLAD15KP20CTR	MICROSEMI	获取价格	Trans Voltage Suppressor Diode, 15000W, 20V V(RWM), Bidirectional, 1 Element, Silicon, PLA
MVPLAD15KP20E3	MICROSEMI	获取价格	Trans Voltage Suppressor Diode, 15000W, 20V V(RWM), Unidirectional, 1 Element, Silicon, RO
MVPLAD15KP22	MICROSEMI	获取价格	Trans Voltage Suppressor Diode, 15000W, 22V V(RWM), Unidirectional, 1 Element, Silicon, PL
MVPLAD15KP220	MICROSEMI	获取价格	Trans Voltage Suppressor Diode, 15000W, 220V V(RWM), Unidirectional, 1 Element, Silicon, P
MVPLAD15KP220A	MICROSEMI	获取价格	Trans Voltage Suppressor Diode, 15000W, 220V V(RWM), Unidirectional, 1 Element, Silicon, P
MVPLAD15KP220AE3	MICROSEMI	获取价格	Trans Voltage Suppressor Diode, 15000W, 220V V(RWM), Unidirectional, 1 Element, Silicon, R

与MVPLAD15KP20CA相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

36
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

28
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

56
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

53

产品中心

服务支持

精选活动

关于我们

帮助中心

MVPLAD15KP20CA

MVPLAD15KP20CA 数据手册

与MVPLAD15KP20CA相关器件

与MVPLAD15KP20CA相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

MVPLAD15KP20CA

MVPLAD15KP20CA 数据手册

与MVPLAD15KP20CA相关器件

与MVPLAD15KP20CA相关文章

您还可以找

您在本页遇到什么问题？