INTEGRATED MAGNETICs JACk
INTEGRATED MAGNETICS & LEDs
10/100 BASE T & 1000 BASE T
MTJ SERIES
INTRODuCTION:
ElECTRICAl:
Adam Tech MTJ series RJ-45 connectors with integrated Operating Voltage: 150V AC
magnetics are designed to support Base 10, 100 and 1000-T
applications such as hubs, routers, ADSL modems, and ATM
transmission equipmentꢀ The integrated magnetics allows the
design engineer to save PC board real-estate and lower the
total part count per systemꢀ This series meets all applicable
specifications for CAT 5, 5e, 6 and IEEE 802ꢀ3ꢀ The USB model
meets all applicable USB 2ꢀ0 specificationsꢀ All configurations
are available with optional LED’sꢀ
Current Rating: 1ꢀ5 Amps Maxꢀ
Contact Resistance: 20 mΩ Maxꢀ
Insulation Resistance: 500 MΩ Minꢀ
Dielectric Withstanding Voltage: 1500V AC for 1 Minute
DC resistance: 1ꢀ2 Ohms Maxꢀ
Interwinding capacitance: 35pF @ 1MHz
Insertion loss: 100KHz to 80MHz = -1ꢀ1dB Minꢀ
Return loss: 1MHz to 30MHz = -18dB Minꢀ
30MHZ to 80MHz = -12dB Minꢀ
FEATuREs:
Single, stacked and ganged configurations available All products Rise time: 30nS Maxꢀ
have a full metal shield to guard against electromagnetic
interferenceꢀ Hi-Temp option availableAll products are fully lead
free and RoHS compliant
Cross talk: 1MHz to 100MHz = 40dB TY ꢀ
Common to Common mode Attenuation: 35dB TY ꢀ
MECHANICAl:
Insertion force: 8 Contacts: 22ꢀ5N
10 Contacts: 24ꢀ5N
MATING PluGs:
Adam Tech modular telephone plugs and all industry standard
telephone plugsꢀ
TEMPERATuRE RATING:
Operation Temperature: -40°C ~ +85°C
sPECIFICATIONs:
Materiaꢀ:
PACkAGING:
Anti-ESD plastic trays or tubes
Insulator: PBT, glass filled, rated UL94V-0
Insulator Color: Black
Contacts: Phosphor Bronze or Brass
Shield: Copper Alloy, Nickel or Tin plated
sAFETY AGENCY APPROVAls:
UL Recognized & CSA Certified, File noꢀ E224049
Contact Pꢀating:
Gold over Nickel underplate on contact area, Tin over Copper
underplate on solder tailsꢀ
MAGNETICs TElEPHONE JACk ORDERING INFORMATION
C
M5
FsD
MTJ
8
8
X
1
lD
sERIEs INDICATOR
MTJ = Modular
NO. OF CONTACT
POsITIONs FIllED
8 or 10
PlATING
sHIElD PIN
lOCATION OPTION
FsD or FsP
TRANsFORMER
TYPE M1 Thru M20
(See page 44-45)
Consult Factory if
transformer type
X = Gold Flash
0 = 15 µin gold
1 = 30 µin gold
2 = 50 µin gold
Telephone Jack
(See drawing
on page 41)
required is not shown
HOusING
PluG sIZE
8 or 10
HOusING TYPE
BODY
COlOR
1 = Black
lED
C = Tab Up, Extended Body
s = Tab Up, Standard Body
T = Tab Down, Short Body
lX = Led Color
(See Chart on page 43)
RlX = Led with Resistor
OPTIONs:
Add designator(s) to end of part number
HT = Hi-Temp insulator for Hi-Temp
soldering processes up to 260°C
PG = Panel ground tabs
40
www.adam-tech.com