MT9D112: 1/4-Inch 2Mp SOC Digital Image Sensor
Features
1/4-Inch 2Mp System-On-A-Chip (SOC) CMOS
Digital Image Sensor
MT9D112
For the latest data sheet, refer to Aptina’s Web site: www.aptina.com
Table 1:
Key Performance Parameters
Value
Features
• Superior low-light performance
Parameter
• Ultra-low-power, low-cost
• Internal master clock generated by on-chip phase-
locked loop (PLL) oscillator
• Electronic rolling shutter (ERS), progressive scan
• Integrated image flow processor (IFP) for single-die
camera module
• Automatic image correction and enhancement,
including 4-channel lens shading correction with
independent corner correction
• Arbitrary image scaling with anti-aliasing
• Integrated microcontroller for flexibility
• Two-wire serial interface providing access to
registers and microcontroller memory
• Selectable output data format: YCbCr, 565RGB,
555RGB, 444RGB, processed Bayer, RAW8, and
RAW10 bit
Optical format
Full resolution
Pixel size
1/4-inch (4:3)
1600 x 1200 pixels (UXGA)
2.2 x 2.2μm
22.1 deg maximum at 75% image
height
27.0 deg maximum at 80% image
height
RGB Bayer pattern
3.56mm x 2.68mm
Electronic rolling shutter (ERS) with
global reset
Chief ray angle
Color filter array
Active pixel array area
Shutter type
Input clock frequency
Maximum frame rate
6−54 MHz
15 fps at full resolution,
24 fps in preview mode,
30 fps in video mode
80 Mb/s
Maximum data rate/
master clock
• Output FIFO for data rate equalization
• Programm able I/ O slew rate
6 MHz to 80 MHz
Analog 2.5−3.1V
• Parallel and serial MIPI data output
• Xenon and LED flash support with fast exposure
adaptation
Digital
I/O
PLL
1.7−1.95V
1.7−1.95V or 2.5−3.1V
2.5−3.1V
Supply voltage
• Flexible support for external auto focus, optical
zoom, and mechanical shutter
• Independently configurable gamma correction
AF
1.7−3.1V
10-bit, on-die
ADC resolution
Responsivity
Dynamic range
SNRMAX
0.53 V/lux-sec (preliminary)
59.5dB (preliminary)
37.7dB (preliminary)
245mW at 15 fps, full resolution
230mW at 30 fps, video mode
168mW at 24 fps, preview mode
10μW, standby/shutdown
Applications
• Cellular phones
• PC cam eras
• PDAs
Power
consumption
Operating temperature –30°C to +70°C (at junction)
Packaging Bare die
Ordering Information
Table 2:
Available Part Numbers
Part Number
Description
MT9D112D00STCK15AC1
MT9D112D00STCZK15AC1
Bare die (22.1 deg CRA)
Bare die (27.0 deg CRA)
PDF: 2042175286/Source:6345780379
MT9D11_DS - Rev. K 5/11 EN
.
1
.
©2005 Aptina Imaging Corporation All rights reserved.