Document 471-1
Shielded Power Inductors
–
MSS1246
• 12 × 12 mm footprint; 4.6 mm high shielded inductors
• Very low DCR and excellent current handling
Designer’s Kit C410 contains 3 each of all values.
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant matte tin over nickel over phos bronze.
Other terminations available at additional cost.
Weight: 2.3 g – 2.5 g
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85ꢀ relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 200/7″ reel; 800/13″ reel; Plastic tape: 24 mm wide,
0.35 mm thick, 16 mm pocket spacing, 4.7 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR3
Isat (A)5
Irms (A)6
1. Please specify termination and packaging codes:
MSS1246-105KLC
SRF
(mOhms)
typ
Inductance2
(µH)
typ4 10% 20% 30% 20°C 40°C
Part number1
max
(MHz) drop drop drop rise rise
Termination:L =RoHS compliant matte tin over
nickel over phos bronze.
MSS1246-102ML_
MSS1246-332ML_
MSS1246-472ML_
MSS1246-562ML_
MSS1246-682ML_
1.0 20ꢀ
5.84
6.60 100
13.60 51
18.4 19.4 19.9 6.00 8.00
10.16 11.24 11.76 4.80 6.30
8.52 9.42 9.86 4.50 6.00
7.64 8.66 9.28 4.19 5.75
6.52 7.34 7.82 3.80 5.20
3.3 20ꢀ 12.1
4.7 20ꢀ 19.1
5.6 20ꢀ 22.1
6.8 20ꢀ 24.9
Special order:
21.3
24.6
27.7
42
37
33
T=RoHS tin-silver-copper
(95.5/4/0.5) or S=non-RoHS
tin-lead (63/37).
Packaging: C=7″ machine-ready reel. EIA-481
embossed plastic tape (200 parts
per full reel).
MSS1246-822ML_
8.2 20ꢀ 27.4
30.5
40.9
43.3
54.1
56.7
67.0
75.0
90.8
31
27
24
22
5.98 6.80 7.34 3.55 4.87
5.72 6.44 6.84 3.30 4.20
5.02 5.76 6.22 3.00 3.95
4.58 5.24 5.54 2.85 3.80
4.28 4.78 5.14 2.71 3.52
3.76 4.24 4.50 2.50 3.40
3.46 3.92 4.18 2.16 2.96
3.14 3.54 3.78 1.90 2.60
2.72 3.14 3.38 1.73 2.39
2.66 3.06 3.24 1.50 2.10
MSS1246-103ML_ 10 20ꢀ
MSS1246-123ML_ 12 20ꢀ
MSS1246-153ML_ 15 20ꢀ
MSS1246-183ML_ 18 20ꢀ
MSS1246-223ML_ 22 20ꢀ
MSS1246-273ML_ 27 20ꢀ
MSS1246-333ML_ 33 20ꢀ
MSS1246-393ML_ 39 20ꢀ
MSS1246-473ML_ 47 20ꢀ
36.8
38.9
48.6
51.0
60.3
67.5
81.7
B=Less than full reel. In tape, but
not machine ready. To have a
leader and trailer added ($25
charge), use code letter C
19.0
18.0
16.0
15.0
13.3
12.0
instead.
D=13″ machine-ready reel. EIA-481
embossed plastic tape. Fac-
tory order only, not stocked
(800 parts per full reel).
95.2 105.8
120.6 134.0
MSS1246-563ML_ 56 20ꢀ
MSS1246-683ML_ 68 20ꢀ
MSS1246-823ML_ 82 20ꢀ
MSS1246-104ML_ 100 20ꢀ 216.8 240.9
MSS1246-124KL_ 120 10ꢀ 287.2 319.2
MSS1246-154KL_ 150 10ꢀ 326.7 363.0
MSS1246-184KL_ 180 10ꢀ 379.5 421.7
MSS1246-224KL_ 220 10ꢀ 488.2 542.5
MSS1246-274KL_ 270 10ꢀ 560.1 622.4
MSS1246-334KL_ 330 10ꢀ 731.4 812.7
133.8 148.7
167.3 185.9
188.5 209.5
10.6
9.7
8.8
8.0
7.2
6.6
5.9
5.3
4.7
4.1
2.34 2.64 2.80 1.44 2.01
2.10 2.40 2.56 1.30 1.80
1.80 2.06 2.24 1.24 1.72
1.64 1.86 2.04 1.20 1.60
1.62 1.82 1.92 1.03 1.42
1.36 1.58 1.70 0.95 1.30
1.34 1.48 1.60 0.89 1.21
1.18 1.30 1.40 0.76 1.00
1.04 1.18 1.24 0.72 0.95
1.00 1.10 1.20 0.65 0.87
2. Inductance measured at 100 kHz, 0.1 Vrms,
0 Adc using a Coilcraft SMD-A fixture in an
Agilent/HP 4263B LCR meter or equivalent.
3. DCR measured on a micro-ohmmeter and a
Coilcraft CCF858 test fixture.
4. SRF measured using an Agilent/HP 8753D
network analyzer and a Coilcraft SMD-D test
fixture.
5. DC current at 25°C that causes the specified
inductance drop from its value without current.
Click for temperature derating information..
6. Current that causes the specified temperature rise
from 25°C ambient.This information is for reference
only and does not represent absolute maximum
ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount
Components” before soldering.
MSS1246-394KL_ 390 10ꢀ 813.7 904.2
MSS1246-474KL_ 470 10ꢀ 935.1 1039
MSS1246-564KL_ 560 10ꢀ 1193 1326
MSS1246-684KL_ 680 10ꢀ 1370 1523
MSS1246-824KL_ 820 10ꢀ 1590 1767
3.8
3.5
3.0
2.8
2.6
0.91 1.00 1.08 0.59 0.79
0.81 0.92 0.98 0.56 0.76
0.76 0.85 0.90 0.50 0.67
0.68 0.77 0.82 0.46 0.62
0.61 0.70 0.75 0.43 0.58
MSS1246-105KL_ 1000 10ꢀ 2090 2323
2.4
0.56 0.63 0.68 0.36 0.50
Document 471-1 Revised 09/02/15
5秒后页面跳转
解析光耦仿真器：升级光耦合器技术的必要性
英伟达新一代Blackwell GPU过热问题致交付延迟
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
