(1/2)
Conformity to RoHS Directive
Chip Beads(SMD)
For Power Line
MPZ Series MPZ1005 Type
FEATURES
SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD
PATTERN
•
TDK has manufactured MPZ1005 type as EMI countermeasure
product for power line.
1 0.05
•
•
This type is the best for energy-saving in the low DC resistance.
No cross talk with closed magnetic circuit structural design.
• It is a product conforming to RoHS directive.
0.45 0.5 0.45
0.1min.
APPLICATIONS
Weight: 1mg
USB, cellular phones, HDDs, CD-ROMs, DVDs, DSCs, LCD
Dimensions in mm
panels, etc.
PRODUCT IDENTIFICATION
TEMPERATURE RANGES
MPZ 1005
S
121
C
T
Operating/storage
–40 to +85°C
(1) (2) (3) (4) (5) (6)
PACKAGING STYLE AND QUANTITIES
(1) Series name
(2) Dimensions L× W
(3) Material code
Packaging style
Quantity
Taping
10000 pieces/reel
(4) Nominal impedance [at 100MHz]
(5) Characteristic type
(6) Packaging style
T:Taping(reel)
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components. The preheat-
ing temperature should be set so that the temperature difference
between the solder temperature and product temperature does
not exceed 150°C.
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• The inductance value may change due to magnetic saturation if
the current exceeds the rated maximum.
10s max.
250 to 260˚C
230˚C
• Do not expose the inductors to stray magnetic fields.
• Avoid static electricity discharge during handling.
• When hand soldering, apply the soldering iron to the printed cir-
cuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
Natural
cooling
180˚C
150˚C
Preheating
60 to 120s
Soldering
30 to 60s
Time(s)
ELECTRICAL CHARACTERISTICS
Impedance
Part No.
DC resistance Rated current
(Ω)[100MHz]∗
(Ω)max.
0.045
0.050
0.075
0.090
(A)max.
2.0
1.7
1.5
1.2
MPZ1005S100C
MPZ1005S300C
MPZ1005S600C
MPZ1005S121C
∗
10 5Ω
30 10Ω
60 25%
120 25%
Test equipment: E4991A or equivalent
Test tool: 16192A or equivalent
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• Please contact our Sales office when your application are considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• All specifications are subject to change without notice.
001-05 / 20061022 / e9413_mpz1005.fm