MPQ6532
5V to 60V, Three-Phase
Brushless DC Motor Pre-Driver,
AEC-Q100 Qualified
DESCRIPTION
FEATURES
The MPQ6532 is a gate driver IC designed for
three-phase brushless DC (BLDC) motor driver
applications. It is capable of driving three half-
bridges, consisting of six N-channel power
MOSFETs, up to 60V.
•
•
Wide 5V to 60V Input Voltage (VIN) Range
Built-in Hall Sensor Inputs and 120°
Commutation Logic
Charge Pump Gate Drive Supply
Bootstrap (BST) High-Side (HS) Driver with
Trickle-Charge Circuit Supports 100% Duty
Cycle Operation
•
•
The MPQ6532 integrates a regulated charge
pump to generate gate drive power, and uses a
bootstrap (BST) capacitor to generate a supply
voltage for the high-side MOSFET (HS-FET)
driver. An internal trickle-charge circuit
maintains a sufficient HS-FET driver voltage
even when the output is at 100% duty cycle.
•
•
•
•
Low-Power Sleep Mode
Configurable Short-Circuit Protection (SCP)
Over-Current Protection (OCP)
Adjustable Dead-Time (DT) Control to
Prevent Shoot-Through
•
Pulse-Width Modulation (PWM) Speed
Control Input
Brake Control Input
Motor Start-Up Current Limit
Thermal Shutdown and Under-Voltage
Lockout (UVLO) Protection
Fault Indication Output
Thermally Enhanced Surface-Mount
Package
Internal safety features include configurable
short-circuit protection (SCP), over-current
protection (OCP), adjustable dead-time (DT)
control, under-voltage lockout (UVLO), and
thermal shutdown.
•
•
•
The MPQ6532 integrates 120° commutation
using three Hall sensor inputs. The pulse-width
modulation (PWM), DIR, and nBRAKE inputs
control the motor speed, direction, and braking,
respectively.
•
•
•
•
Available in a QFN-28 (4mmx5mm)
Package
Available in AEC-Q100 Grade 1
The MPQ6532 is available in a QFN-28
(4mmx5mm) package with an exposed thermal
pad, and is AEC-Q100 qualified.
APPLICATIONS
•
Three-Phase Brushless DC (BLDC) Motors
and Permanent Magnet Synchronous
Motors (PMSMs)
•
Automotive Actuators, Pumps, and Fans
All MPS parts are lead-free, halogen-free, and adhere to the RoHS
directive. For MPS green status, please visit the MPS website under
Quality Assurance. “MPS,” the MPS logo, and “Simple, Easy Solutions” are
trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
MPQ6532 Rev. 1.0
11/4/2021
MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2021 MPS. All Rights Reserved.
1