MPQ3367
6-Channel, Max.150mA/Ch
Boost WLED Driver
with 15000:1 Dim Ratio and I2C
FEATURES
DESCRIPTION
•
•
•
•
•
•
3.5V to 36V Input Voltage Range
6 Channels with Max. 150mA per Channel
Internal 100mΩ, 50V MOSFET
Programmable Up to 2.2MHz fSW
External Sync SW Function
Multi-Dimming Operation Mode through
PWM Input, Including:
The MPQ3367 is a step-up converter with 6
channel current sources, designed to drive the
white LED arrays as backlighting in small-to-mid-
size LCD panels.
The MPQ3367 uses peak current mode as its
PWM control architecture to regulate the boost
converter. Six channel current sources are
applied into the LED cathode to adjust the LED
brightness. The MPQ3367 regulates the current
in each LED string to the value set by an external
current-setting resistor, with 2.5% current
regulation accuracy between strings.
o Direct PWM Dimming
o Analog Dimming
o Mix Dimming with 25%/12.5%
Transfer Point
•
•
•
15000:1 Dim Ratio in PWM Dim at FPWM
200Hz
200:1 Dim Ratio at Analog Dim through
PWM Dim Signal Input
≤
The MPQ3367 employs a low on-resistor
MOSFET and a low headroom voltage, designed
for higher efficiency. It has a standard I2C digital
interface for ease of use. The switching
frequency can be programmed by a resistor, I2C
interface, or external clock.
Excellent EMI Performance, Frequency
Spread Spectrum
•
•
•
•
•
•
I2C Interface
Phase Shift Function for PWM Dimming
2.5% Current Matching
Cycle-by-Cycle Current Limit
Disconnect VOUT from VIN
Optional LED Current Auto-Decrement at
High Temperature
The MPQ3367 provides analog, PWM, and mix
dimming mode with a PWM input. Dimming
mode can be selected with the I2C interface or
the MIX/AD pin. It also has a phase shift function
to eliminate noise during PWM dimming.
•
LED Short/Open, OTP, OCP, Inductor
Short Protection
Robust protections are included to guarantee
safe operation of the device. Protection modes
include over-current protection (OCP), over-
voltage protection (OVP), over-temperature
protection (OTP), LED short, and open
protection. There is also an option that
decreases the LED current automatically at
higher temperatures.
•
•
•
•
Programmable LED Short Threshold
Programmable OVP Threshold
Fault Indicator Signal Output
QFN-24 4mmx4mm and TSSOP28-EP
Package
•
AEC-Q100 qualified
The MPQ3367 is available in a QFN-24
4mmx4mm and TSSOP28-EP package.
APPLICATIONS
•
•
Tablet/Notebook
Automotive Display
All MPS parts are lead-free, halogen free, and adhere to the RoHS directive. For
MPS green status, please visit MPS website under QualityAssurance. “MPS” and
“The Future of Analog IC Technology” are Registered Trademarks of Monolithic
Power Systems, Inc.
MPQ3367 Rev. 1.1
12/8/2020
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2020 MPS. All Rights Reserved.
1