MP6531A
5V - 60V, Three-Phase, Brushless,
DC Motor Pre-Driver
DESCRIPTION
FEATURES
The MP6531A is a gate driver IC designed for
three-phase, brushless, DC motor driver
applications. The MP6531A is capable of
driving three half-bridges consisting of six N-
channel power MOSFETs up to 60V.
Wide 5V to 60V Input Voltage Range
Bootstrap Gate Driver with Trickle-Charge
Circuit Supports 100% Duty Cycle
Operation
Low-Power Sleep Mode for Battery-
Powered Applications
Programmable Over-Current Protection of
the External MOSFETs
Adjustable Dead-Time Control to Prevent
Shoot-Through
The MP6531A uses a bootstrap capacitor to
generate a supply voltage for the high-side
MOSFET driver. An internal trickle-charge
circuit maintains a sufficient gate driver voltage
at 100% duty cycle.
Thermal Shutdown and UVLO Protection
Fault Indication Output
Internal safety features include programmable
over-current protection (OCP), adjustable dead-
time control, under-voltage lockout (UVLO), and
thermal shutdown.
Thermally
Packages
Enhanced
Surface-Mounted
APPLICATIONS
The MP6531A is available in 28-pin TSSOP-EP
(9.7mmx6.4mm) and QFN-28 (4mmx4mm)
packages with exposed thermal pads on the
back.
Three-Phase, Brushless, DC Motors
Permanent Magnet Synchronous Motors
Power Drills
Impact Drivers
E-Bikes
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive.
For MPS green status, please visit the MPS website under Quality
Assurance. “MPS” and “The Future of Analog IC Technology” are registered
trademarks of Monolithic Power Systems, Inc.
TYPICAL APPLICATION
CPA
CPB
0.47µF
DT
VIN
CREG
RDT
VREG
VIN
nFAULT
CIN
MP6531A
OC_REF
BSTA
nSLEEP
Exposed GND
GHA
SHA
PAD
LA
LB
LC
HA
HB
HC
GLA
LSS
Phase A
(repeat for B and C)
To Phase B
To Phase C
GND
MP6531A Rev. 1.02
6/20/2017
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2017 MPS. All Rights Reserved.
1