MP6539B
100V, Three-Phase BLDC Motor Pre-Driver
DESCRIPTION
FEATURES
The MP6539B is a gate driver IC designed for
three-phase, brushless DC motor driver
applications. The MP6539B is capable of
driving three half-bridges consisting of six N-
channel power MOSFETs up to 100V.
Supports 100V Operation
120V VBST Maximum Voltage
Integrated Current-Sense Amplifier
Low-Power Sleep Mode for Battery-
Powered Applications
Adjustable Dead-Time Control to Prevent
Shoot-Through
Thermal Shutdown and Under-Voltage
Lockout (UVLO) Protection
Fault Indication Output
Available in Thermally Enhanced, Surface-
Mounted TSSOP and QFN Packages
The MP6539B uses a bootstrap capacitor to
generate a supply voltage for the high-side
MOSFET driver. An internal charge pump
maintains the high-side gate drive if the output
is held high for an extended period of time.
Internal safety features include shoot-through
protection, adjustable dead-time control, under-
voltage lockout (UVLO), and thermal shutdown.
APPLICATIONS
The MP6539B is similar to the MP6539. It does
not implement auto bootstrap charging, does
not include over-current protection, and is
powered only from the VDD pin (VIN and LDO
have been removed).
Three-Phase, Brushless DC Motors and
Permanent Magnet Synchronous Motors
Power Drills
E-Bike
All MPS parts are lead-free, halogen free, and adhere to the RoHS directive. For
MPS green status, please visit the MPS website under Quality
Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are registered
trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
The MP6539B is available in TSSOP-28
(9.7mmx6.4mm) and QFN-28 (4mmx5mm)
packages with an exposed thermal pad.
TYPICAL APPLICATION
VIN
VDD
MP6539B
VDD
BSTA
nFAULT
HSA
GHA
SHA
HSB
HSC
LSA
LSB
Exposed GND
PAD
GLA
LSS
LSC
nSLEEP
Phase A
(Repeat for B and C)
CSO
DT
To Phase B
To Phase C
GND
MP6539B Rev. 1.0
4/23/2019
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2019 MPS. All Rights Reserved.
1