MP44014-A – BOUNDARY MODE PFC CONTROLLER
ABSOLUTE MAXIMUM RATINGS (1)
Supply Voltage VCC .............. -0.5V to Self Limit
Zero Current Sensing (ZCS) . -0.3V to Self Limit
Other Analog Inputs and Outputs -0.3V to 6.5V
ZCS Max. Current.....................-2.0mA to 10mA
Continuous Power Dissipation (TA = +25°C) (2)
SOIC8........................................................ 1.4W
Junction Temperature………………… …..150C
Lead Temperature (Solder).......................260C
Storage Temperature............... -55C to +150C
Thermal Resistance (4)
SOIC-8....................................90 ...... 45...C/W
θJA
θJC
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature TJ(MAX), the junction-to-
ambient thermal resistance θJA, and the ambient temperature
TA. The maximum allowable continuous power dissipation at
any
ambient
temperature
is
calculated
the maximum
by
D(MAX)=(TJ(MAX)-TA)/θJA.
Exceeding
allowable power dissipation produces an excessive die
temperature, causing the regulator to go into thermal
shutdown. Internal thermal shutdown circuitry protects the
device from permanent damage.
Recommended Operating Conditions (3)
Supply Voltage VCC ......................13.8V to 21V
Operating Junction Temp. (TJ). -40°C to +125°C
3) The device is not guaranteed to function outside of its
operating conditions.
4) Measured on JESD51-7, 4-layer PCB.
MP44014-A Rev. 1.01
11/10/2015 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2015 MPS. All Rights Reserved.
www.MonolithicPower.com
3