MP3378 – 4-CHANNEL WLED CONTROLLER PLUS BUCK CONVERTER
PACKAGE REFERENCE
TOP VIEW
1
2
3
4
5
6
7
8
28
27
PWM
EN
GND1
OSC
1
2
28
27
26
25
24
23
22
21
20
19
18
17
16
15
GND1
OSC
ISET
ADIM
LED4
LED3
LED2
LED1
OVP
NC
PWM
EN
COMP
VCC1
VIN1
ISET
ADIM
LED4
26
25
24
23
3
COMP
VCC1
VIN1
4
5
LED3
LED2
GATE
ISENSE
6
GATE
ISENSE
SYNC
BST
22
21
20
7
Exposed Pad
Connect to GND
8
LED1
OVP
NC
SYNC
BST
9
9
10
11
12
13
14
AGND
GND2
GND2
SW
10
11
AGND
19
18
NC
NC
GND2
GND2
SW
FB
FB
12
13
17
16
15
AAM
VCC2
AAM
VCC2
VIN2
14
VIN2
SOIC28
TSSOP28EP
ABSOLUTE MAXIMUM RATINGS (1)
WLED Driver
Thermal Resistance (4)
SOIC-28…………………..……62.5……30....°C/W
θJA θJC
VIN1 ........................................... -0.3 V to + 28 V
VLED1 to VLED4 ............................... -1 V to + 55 V
VGATE, VCC1, VISENSE .................. -0.3 V to + 6.5 V
All other pins............................. –0.3 V to VCC1
Buck Converter
TSSOP-28 EP……………...…32…….…6....°C/W
NOTES:
1) Exceeding these ratings may damage the device. The voltage
is measured with a 20 MHz bandwidth limited oscilloscope.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature TJ (MAX), the junction-to-
ambient thermal resistance θJA, and the ambient temperature
TA. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by PD (MAX) = (TJ
(MAX)-TA)/θJA. Exceeding the maximum allowable power
dissipation produces an excessive die temperature, causing
the regulator to go into thermal shutdown. Internal thermal
shutdown circuitry protects the device from permanent
damage.
VIN2, VSW ..................................... –0.3 V to 28 V
VBST ....................................................VSW + 6 V
All other pins................................. –0.3 V to 6 V
(2)
Continuous power dissipation (TA = 25°C)
SOIC-28 ......................................................2 W
TSSOP-28 EP ..........................................3.9 W
Junction temperature...............................150°C
Lead temperature ....................................260°C
3) The device is not guaranteed to function outside of its
operating conditions.
4) Measured on JESD51-7, 4-layer PCB.
Recommended Operating Conditions (3)
Supply voltage (VIN1, VIN2) ................ 5 V to 24 V
Operating junction temp. (TJ). ..-40°C to +125°C
MP3378 Rev. 1.01
5/26/2017
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2017 MPS. All Rights Reserved.
4