MP3364
4-Channel, Maximum 150mA/Ch
Boost WLED Driver
with 15000:1 Dimming Ratio and I2C
DESCRIPTION
FEATURES
The MP3364 is a step-up converter with four
channel current sources. The device is
designed to drive white LED arrays as
backlighting for small- or medium-sized LCD
panels.
3.5V to 36V Input Voltage Range
4 Channels with Maximum 150mA per
Channel
Internal 100mΩ, 50V MOSFET
Configurable fSW Up to 2.2MHz
External Sync SW Function
Multi-Dimming Operation Mode through
PWM Input, Including:
The device uses peak current mode as its PWM
control architecture to regulate the boost
converter. Four channel current sources are
applied to the LED cathode to adjust the LED
brightness. The MP3364 regulates the current
in each LED string to the value set by an
external current-setting resistor, with 2.5%
current regulation accuracy between strings.
o Direct PWM Dimming
o Analog Dimming
o Mixed Dimming with 25% or 12.5%
Transfer Point
15000:1 Dimming Ratio during PWM
Dimming when fPWM ≤ 200Hz
200:1 Dimming Ratio during Analog
Dimming through PWM Dimming Signal
Input
Excellent EMI Performance, Frequency
Spread Spectrum
I2C Interface, 3 Selectable IC Addresses
Phase Shift Function for PWM Dimming
2.5% Current Matching
Cycle-by-Cycle Current Limiting
Disconnect VOUT from VIN
Optional: LED Current Can Automatically
Decrease at Higher Temperatures
LED Short/Open, OTP, OCP, and Inductor
Short Protection
Configurable LED Short Threshold
Configurable OVP Threshold
Fault Indicator Signal Output
Available in a QFN-24 (4mmx4mm)
Package
A low on resistance MOSFET and headroom
voltage are provided to improve efficiency. The
MP3364 has a standard I2C digital interface for
easy use. The switching frequency can be
configured via a resistor, I2C interface, or
external clock.
The MP3364 provides analog, PWM, and mixed
dimming modes with a PWM input. The
dimming mode can be selected via the I2C
interface or the MIX/AD pin. The device also
has a phase shift function to eliminate noise
during PWM dimming.
Robust protections are included to guarantee
safe operation. Protections include over-current
protection (OCP), over-voltage protection
(OVP), over-temperature protection (OTP), LED
short protection, and LED open protection. The
MP3364 can automatically decrease the LED
current at higher temperatures.
The MP3364 is available in a QFN-24
(4mmx4mm) package.
APPLICATIONS
Tablets
Notebooks
All MPS parts are lead-free, halogen-free, and adhere to the RoHS
directive. For MPS green status, please visit the MPS website under
Quality Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are
trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
MP3364 Rev. 1.0
4/7/2021
MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2021 MPS. All Rights Reserved.
1