MP2722
5A, Single-Cell, I2C-Controlled NVDC
Buck Charger with Integrated
USB Type-C DRP Detection
o
o
Configurable Die Temperature
Regulation from 60°C to 120°C
Complete Charge and Pre-Charge
Safety Timers
Watchdog Safety Timer
Lockable Registers for Charging
Parameters
DESCRIPTION
The MP2722 is a highly integrated, 5A, switch-
mode battery management device for single-
cell Li-ion or Li-polymer battery. The narrow-
voltage DC (NVDC) power management
structure provides low impedance power path
that optimizes charging efficiency, reduces
battery charging time, and extends battery life
during discharging.
o
o
•
•
•
•
•
•
Configurable 750kHz to 1.5MHz Switching
Frequency (fSW)
Integrated 15mΩ Low- RDS(ON) Battery
MOSFET with Shipping and Reset Modes
Ultra-Low 8.5μA Battery Discharge Current
in Shipping Mode
Down to 30mA Termination Current Settings
for Wearable Applications
I2C Port for Flexible System Parameter
Setting and Status Reporting
The MP2722 is USB Type-C 1.3 complaint, and
features dual-role power (DRP) mode with as
sink preferred (try.SNK) and source preferred
(try.SRC) support. The device’s input source
type identification algorithm supports USB
battery charging specification 1.2 (BC1.2) and
non-standard adapter detection.
The I2C interface offers complete operating
Configurable Boost Converter for Source
Mode and USB On-The-Go (OTG):
o
control,
including
charging
parameter
Configurable Output Current Limit Loop
Up to 3A
Output Over-Current Protection (OCP)
Ability to Power into Large Capacitive
Loads Up to 2mF
configurations and status/interrupt monitoring.
The MP2722 supports a fully customizable
JEITA profile with configurable temperature
windows and actions.
o
o
o
Configurable 5V to 5.35V Output
Voltage
The MP2722 is available in a QFN-22
(2.5mmx3.5mm) package.
•
•
Accuracy:
FEATURES
o
±0.5% Battery Regulation Voltage
(VBATT_REG
±5% ICC
±5% IIN_LIM
Remote Battery Sensing for Fast
Charge
)
•
•
USB Type-C 1.3 Compliant
o
o
o
Fully Integrated CC Controller with Dual-
Role Power (DRP) Mode and Autonomous
or Manual Mode
•
•
Try.SNK and Try.SRC Mode Support
Supports USB BC1.2 and Non-Standard
Adapters
o
±2% Output Regulation in Boost Mode
Available in a Small QFN-22
(2.5mmx3.5mm) Package
•
•
26V Sustainable Input Voltage (VIN)
Configurable 80mA to 5A Charge Current
(ICC) via the I2C
APPLICATIONS
•
•
•
•
•
General ≤15W USB Type-C Applications
Bluetooth Headphones
Bluetooth Speakers
Point-of-Sale (POS) Terminals
Portable Cameras
•
•
•
Configurable 100mA to 3.2A Input Current
Limit (IIN_LIM) via the I2C
Minimum VIN Loop for Maximum Adaptor
Power Tracking
Comprehensive Safety Features:
o
o
Fully Customizable JEITA Profile
Additional Negative Temperature
Coefficient (NTC) Thermistor Input
All MPS parts are lead-free, halogen-free, and adhere to the RoHS
directive. For MPS green status, please visit the MPS website under
Quality Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are
trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
MP2722 Rev. 1.0
11/3/2022
MonolithicPower.com
1
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2022 MPS. All Rights Reserved.