MMT08B310T3
Preferred Devices
Thyristor Surge Protectors
High Voltage Bidirectional TSPD
These Thyristor Surge Protective devices (TSPD) prevent
overvoltage damage to sensitive circuits by lightning, induction and
power line crossings. They are breakover−triggered crowbar
protectors. Turn−off occurs when the surge current falls below the
holding current value.
• High Surge Current Capability: 80 Amps 10 x 1000 μsec, for
Controlled Temperature Environments
• The MMT08B310 is used to help equipment meet various regulatory
requirements including: Bellcore 1089, ITU K.20 & K.21, IEC 950,
UL 1459 & 1950 and FCC Part 68.
http://onsemi.com
(
)
BIDIRECTIONAL TSPD
80 AMP SURGE
310 VOLTS
MT1
MT2
• Bidirectional Protection in a Single Device
• Little Change of Voltage Limit with Transient Amplitude or Rate
• Freedom from Wearout Mechanisms Present in Non−Semiconductor
Devices
• Fail−Safe, Shorts When Overstressed, Preventing Continued
Unprotected Operation
• Surface Mount Technology (SMT)
SMB
(No Polarity)
(Essentially JEDEC DO−214AA)
CASE 403C
•
Indicates UL Registered − File #E210057
• Pb−Free Package is Available
MARKING DIAGRAM
MAXIMUM RATINGS (T = 25°C unless otherwise noted)
J
AYWW
RPCJG
G
Rating
Symbol
Value
Unit
Off−State Voltage − Maximum
V
V
DM
MMT08B310T3
"270
RPCJ = Specific Device Code
Maximum Pulse Surge Short Circuit
Current Non−Repetitive
Double Exponential Decay Waveform
(Notes 1 and 2)
10 x 1000 μsec
(−25°C Initial Temperature)
8 x 20 μsec
A(pk)
A
Y
= Assembly Location
= Year
WW
G
= Work Week
= Pb−Free Package
(Note: Microdot may be in either location)
I
I
I
I
"80
"250
"150
"100
PPS1
PPS2
10 x 160 μsec
10 x 560 μsec
PPS3
ORDERING INFORMATION
PPS4
Maximum Non−Repetitive Rate of
Change of On−State Current
di/dt
"150
A/μs
Device
Package
Shipping†
MMT08B310T3
SMB
2500 Tape & Reel
Double Exponential Waveform,
R = 1.0, L = 1.5 μH, C = 1.67 μF,
I
= 110A
MMT08B310T3G
SMB
2500 Tape & Reel
pk
Pb−Free
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
1. Allow cooling before testing second polarity.
2. Measured under pulse conditions to reduce heating.
Preferred devices are recommended choices for future use
and best overall value.
©
Semiconductor Components Industries, LLC, 2005
1
Publication Order Number:
August, 2005 − Rev. 3
MMT08B310T3/D