Applicable standard
Operating
Storage
-55 °C to +85 °C ( 90 %RH Max.)
-55 °C to +85 °C ( 90 %RH Max.)
50 Ω ( 0 to 6 GHz)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
-- W
----
Rating Power
0.085 inch semi-flexible cable
Peculiarity
SPECIFICATIONS
ITEM
CONSTRUCTION
General examination
Marking
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
Visually and by measuring instrument.
Confirmed visually.
X
-
X
-
ELECTRICAL CHARACTERISTICS
Contact resistance
100 mA (DC or 1000 Hz)
Center contact 10 mΩ Max.
X
X
X
X
X
X
X
X
X
-
Outer contact 5 mΩ Max.
500 MΩ Min.
Insulation resistance
Withstanding voltage
Voltage standing
wave ratio
500 V DC.
500 V AC for 1 min. current leakage 2 mA Max.
Frequency 0 to 6 GHz.
No flashover or breakdown.
VSWR 1.3 Max.
Insertion loss
Frequency - to - GHz.
--- dB Max.
-
-
MECHANICAL CHARACTERISTICS
Contact insertion and
φ
by steel gauge.
Insertion force
Extraction force --- N Min.
Insertion force --- N Max.
--- N Max.
-
-
-
X
-
-
-
X
extraction forces
Insertion and
Measured by applicable connector.
100 times insertion and extractions.
extraction forces
Mechanical operation
Extraction force 6 N Min.
1)Contact resistance:
Center contact 20 mΩ Max.
Outer contact 10 mΩ Max.
X
-
2)No damage, crack and looseness of parts.
Vibration
Shock
Frequency 10 to 500 Hz single amplitude 0.75 mm, 1)No electrical discontinuity of 1 μs.
X
X
-
-
98 m/s2 at 12 cycles for 3 directions.
735 m/s2 directions of pulse 6 ms
2)No damage, crack and looseness of parts.
at 3 times for 3 directions.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of 30 mm/min. and record the strength at which
the cable or connector breaks.
40 N Min.
X
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at +25 to +65 °C, 90 to 98 %
total 10 cycles.( 240 h)
1)Insulation resistance: 10 MΩ Min.
(at high humidity)
2) Insulation resistance: 500 MΩ Min.
(at dry)
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
X
X
-
-
Rapid change of
temperature
Temperature
Time
-55 → - → +85 → - °C
30 → 3 → 30 → 3 min.
Under 5 cycles.
(Delete)
1
△
Count
1
Description of revisions
DIS-D-00002067
Designed
TM.YOSHIDA
Checked
TO.KATAYAMA
Date
17.05.09
1
△
KY.SHIMIZU
KY.SHIMIZU
TM.YOSHIDA
TM.YOSHIDA
16.07.25
Remark
Approved
Checked
Designed
Drawn
RoHS COMPLIANT
16.07.25
16.07.25
16.07.25
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-365086-00-00
SPECIFICATION SHEET
MMCX(AR)-P-SF085
CL339-0040-0-00
1
△
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
FORM HD0011-2-1